Baxi Multifit Telescopic Horizontal Flue - White

The flue must be installed by a Gas Safe registered engineer to ensure safety and compliance with regulations.

This flue is designed for use with Baxi Duo-tec, EcoBlue, and Potterton Promax boilers.

The flue is telescopic, allowing you to extend or retract it to fit the required length. Refer to the installation instructions for the correct procedure.

The main extension is made from white aluminium, and the terminal end is also white.

It is recommended to inspect the flue regularly (e.g., every 6-12 months) for any blockages or damage.

Use a soft cloth and mild soapy water to clean the terminal end. Avoid using abrasive cleaners.

Please refer to the manufacturer's warranty information for specific details.

No, the maximum extension length is 500mm. Using additional extensions or altering the flue is not advised. Consult the manufacturer's guidelines for further details.

Check for blockages in the flue terminal or within the flue itself. Ensure the flue is correctly sealed and installed according to the manufacturer's instructions. Contact a Gas Safe registered engineer if the issue persists.

Ensure the flue is properly sloped to allow condensation to drain away from the boiler. Check for any leaks in the flue joints and reseal if necessary. Consult a qualified engineer if the problem persists.

Check that the flue is correctly fitted and not causing a restriction in airflow. Contact a Gas Safe registered engineer to check the boiler and flue for faults.