Bowland Stone Chalice Paving Kit - Welsh Slate

The kit covers approximately 7.29m², which is suitable for a 2.7m x 2.7m patio.

Each slab is 35mm thick.

Regularly sweep the slabs to remove debris. Use appropriate concrete cleaners for stains.

You'll need basic tools such as a spirit level, measuring tape, rubber mallet, and possibly a saw for cutting slabs.

A compacted base of crushed stone or hardcore is recommended for proper drainage and stability.

While suitable for patios and walkways, this kit may not be ideal for heavy vehicle traffic. Consider a more robust paving solution for driveways.

Use a weed-resistant jointing compound or sand and apply weed killer regularly.

With proper installation and care, the Bowland Stone Chalice Paving Kit should last for many years.

Check the base layer for any unevenness and ensure the slabs are properly leveled during installation. Re-level if necessary.

Apply weed killer or remove weeds manually. Re-joint the slabs with a weed-resistant compound or sand.

Clean the slabs with appropriate concrete cleaners. Consider sealing the surface to prevent future staining.