Best current price£9.63from Amazon
Shopping.co.uk recommended and popular offers
Amazon£9.63Visit shop StarTech 1m Cat6 Slim Ethernet Cable, LSZH, Yellow (N6PAT100CMYLS) | 28AWG copper, LSZH, Gold-plated RJ45, Patch Cable, Ethernet Cord, Snagless, 100W PoE++ delivery, 10Gbps speeds, 250MHz
Visit shop4 offers from £9.63 - £16.15
View price history by clicking the chart icon.
The StarTech.com 1m Yellow Slim CAT6 Ethernet Cable is designed for IT professionals and network administrators working in high-density installations. Its primary benefit is enabling better airflow and flexibility within crowded network racks, ensuring reliable Gigabit and Power over Ethernet (PoE++) connections. A key consideration is its slim profile, which may require careful handling to avoid damage to the thinner wires.
| Series | Slim CAT6 |
|---|---|
| Model Part Number | N6PAT100CMYLS |
| Brand | StarTech.com |
Slim Cat6 cables are typically 36% thinner than standard Cat6 cables, which allows for better airflow and easier routing in high-density installations like crowded network racks.
Yes, this cable is designed to support PoE++, IEEE 802.3bt Type 4, and can reliably deliver up to 90W of power.
LSZH stands for Low Smoke Zero Halogen. Cables with this jacket material emit minimal smoke and no toxic halogens when exposed to high heat or fire, making them safer for installations in poorly-ventilated or enclosed spaces.
This Cat6 cable supports speeds of up to 1000 Mbps (1 Gigabit per second) for Fast Ethernet and Gigabit Ethernet.
This cable is U/UTP (Unshielded Twisted Pair), meaning it does not have an overall metallic shield.
The cable uses 28AWG pure bare copper wire for its conductors, offering good conductivity and low resistance.
The cable features 50-micron gold-plated RJ45 connectors for reliable contact, and they are equipped with snagless boots to protect the locking clips during installation and use.
This particular model is 1 meter in length.
Ensure both ends of the cable are securely plugged into the network devices. Verify that the connected devices are powered on and configured correctly. Test with a different known-good cable to rule out a cable fault.
Confirm that both connected devices support Gigabit Ethernet. Check for physical damage to the cable or connectors. Ensure the cable is not exceeding its recommended length for optimal performance (though 1m is well within limits). Verify network traffic and other potential bottlenecks.
Verify that the connected network switch or injector supports PoE++ (802.3bt Type 4) and can provide the required wattage. Ensure the device connected at the other end is a PoE-powered device. Check if the PoE budget on the switch has been exceeded.
Inspect the cable for any visible signs of damage, such as cuts, kinks, or damaged connectors. Ensure the RJ45 connectors are fully seated. If the cable is routed near sources of strong electromagnetic interference, try repositioning it.
Setup
Compatibility
Care
