Best current price£2.24from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£2.24Visit shop Dencon Black 2461Bnb 2 Core Inline Switch 2A
Visit shop
B&Q£6.46Visit shop B&Q - 2461Bnb 2 Core Inline Switch 2A Black Dcn2461Bnb
Visit shop6 offers from £2.24 - £6.63
View price history by clicking the chart icon.
The Dencon 2A Inline Switch is designed for homeowners and DIY enthusiasts looking to add reliable manual control to their table lamps or small lighting fixtures. This double pole switch provides an essential safety upgrade and convenient operation for your lighting, though it requires basic electrical knowledge and wire stripping to install correctly into an existing flex.
| Colour | Black |
|---|---|
| Model Part Number | PTDDCN2461BNB |
| Brand | Dencon |
Yes, but ensure your lamp is properly grounded and the wiring is performed by a competent person to avoid safety risks.
No, this product is designed for indoor use only and is not water or weather-resistant.
The switch is designed for standard twin-core flex typically found on table lamps.
Yes, as a double pole switch, it physically breaks the circuit on both lines for enhanced safety.
At 2A, the switch is suitable for lamps up to approximately 460 watts, though we recommend staying well within this limit for standard lighting.
Verify that the live and neutral wires are securely fastened to the terminals and that the copper conductors are not touching.
Open the casing to ensure the internal rocker mechanism is properly seated and that no debris is obstructing the movement.
Installation requires basic tools including a wire stripper, screwdriver, and electrical tape. Ensure the lamp is disconnected from the power source before beginning. Cut the flex, strip back the insulation on both sides, and connect the live and neutral wires to the corresponding terminals within the switch housing. Tighten all screws firmly to prevent arching. Once installed, wipe the exterior with a dry cloth; avoid using water or household chemicals. Regularly inspect the cord for wear or fraying near the switch entry point to ensure continued safety.
