Antiference Indoor TV Signal Splitter - 3 Way F-Type

DC pass-through means the splitter allows direct current (DC) electrical power to flow through its coaxial connections. This is crucial for powering active devices like aerial preamplifiers, which require a power source to boost the TV signal before it reaches the splitter.

Yes, this splitter is compatible with satellite TV signals provided they use F-type coaxial connections and the signal strength is adequate for distribution after splitting.

All signal splitters cause some degree of signal loss (attenuation). For 3 outputs, the loss is generally manageable for most standard TV viewing. If you experience a noticeable degradation in picture quality, you may need to install a signal amplifier.

The ground point should be connected using a separate earth wire (typically 4mm2 or 6mm2) to your home's main electrical earth grounding system for safety. Consult a qualified electrician if you are unsure.

F-type connectors are the standard for modern TV and satellite installations, featuring a threaded coupling for a secure connection. They are common on coaxial cables and most TV equipment, ensuring a reliable connection and good signal integrity.

No, this splitter is designed for indoor use only and should be protected from moisture and extreme temperatures.

Verify that the main coaxial cable is securely connected to the input port. Check that the source signal (aerial/dish) is functioning correctly. Ensure the splitter is not faulty by testing the input cable directly to one TV.

Signal loss is inherent with splitters; consider adding a signal amplifier if distributing to many devices or over long distances. Check all cable connections for tightness and ensure cables are not damaged. If using a preamp, confirm DC pass-through is functioning and the preamp is powered.

Check the coaxial cables connecting the splitter to the non-working TVs. Try swapping cables or ports to isolate if the issue is with a specific cable, port, or TV.

Ensure the 'IN' port and at least one 'OUT' port are connected. Confirm your set-top box or power supply unit is providing DC voltage. Verify that the cables used are suitable for DC pass-through.