Bartoline Bitcote Black Bitumen Paint - Black
Best current price£23.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£23.99Visit shop 2x Bartoline Bitcote Black Bitumen Paint Anti-Corrosion Waterproof Flexible 1L
Visit shopeBay£23.99Visit shop All Offers
2 offers from £23.99 - £26.99
View price history by clicking the chart icon.
eBay2x Bartoline Bitcote Black Bitumen Paint Anti-Corrosion Waterproof Flexible 1L
Free delivery in 1–3 days
£23.99
Visit shop
2x Bartoline Bitcote Black Bitumen Paint Anti-Corrosion Waterproof Flexible 1LFree delivery in 1–3 days£26.99Visit shop →
Product Information
Full details
This guide is for DIY enthusiasts and professionals seeking a durable, anti-corrosive coating for iron and steel. Bartoline Bitcote Black Bitumen Paint offers excellent waterproofing and flexibility, providing long-lasting protection. However, it's important to note that it has a specific drying time and its glossy finish will naturally dull over time.
All features
| Colour | Black |
|---|---|
| Model Part Number | BP7580 |
| Brand | Bartoline |
Extended Product Information
FAQs
How long does Bartoline Bitcote Black Bitumen Paint take to dry?
The paint is touch dry in approximately 4-8 hours at normal temperatures. Ensure the first coat is dry before applying the second.
What surfaces is this paint suitable for?
It is primarily designed for iron and steel, offering outstanding anti-corrosive and waterproofing solutions.
Can I paint over this bitumen paint with another type of paint?
No, you should not apply ordinary paints over Bartoline Bitcote Black Bitumen Paint. It is intended as a final protective coating.
How should I clean my brushes after using this paint?
Clean application tools immediately after use with Bartoline White Spirit.
What is the coverage rate of Bitcote Black Bitumen Paint?
One liter of Bitcote is sufficient to cover approximately 10 square meters, though this can vary depending on the porosity of the surface.
Can this paint be used in high-temperature areas?
No, do not use this paint if the surface temperature can rise above 70°C.
Is this paint suitable for driveways or roads?
No, do not use Bartoline Bitcote Black Bitumen Paint on tarmacadam drives, roadways, or similar surfaces.
Troubleshooting
Paint not adhering properly
Ensure the surface was thoroughly cleaned, dried, and free of rust before application. Surface temperature may have been too low or too high during application.
Uneven or streaky finish
Check for consistent brush strokes or spray pattern. If spraying, ensure correct thinning (max 10% White Spirit) and nozzle setting. Apply second coat at right angles to the first.
Paint remains tacky after extended drying time
Ensure application was not too thick and environmental conditions (temperature, humidity) are within normal ranges. Avoid applying over incompatible surfaces.
Glossy finish is not desired long-term
Note that the initial glossy finish will naturally dull over time due to climatic and atmospheric conditions, providing a more matte appearance.
Pros and Cons
Pros
- Provides excellent anti-corrosive and waterproofing properties.
- Offers a flexible and durable protective layer.
- Easy to apply via brush or spray.
- Economical coverage rate.
- Suitable for a wide range of iron and steel applications.
Cons
- Glossy finish turns dull over time due to environmental factors.
- Requires careful surface preparation for optimal adhesion.
- Cannot be applied over ordinary paints.
- Not suitable for surfaces that will exceed 70°C.
- Cannot be used on tarmacadam drives or roadways.
Setup, Compatibility & Care
Preparation is Key: Ensure all surfaces are clean, dry, and stable before application. For metal, remove all traces of rust using a wire brush. For extended protection, consider using a dedicated rust-inhibitive primer before applying Bitcote.
Application: Apply a minimum of two coats using a brush or spray. Allow the first coat to dry thoroughly (4-8 hours) before applying the second coat at right angles to the first for maximum coverage and adhesion.
Thinning for Spraying: If spraying, thin the paint with no more than 10% Bartoline White Spirit. Over-thinning can compromise the paint's integrity.
Compatibility:
- DO NOT APPLY ORDINARY PAINTS OVER BITCOTE. This paint should be the final coating.
- DO NOT APPLY WHERE MINERAL OILS OR SOLVENTS WILL COME INTO CONTACT. This can degrade the coating.
- DO NOT USE IF SURFACE TEMPERATURE CAN RISE ABOVE 70°C. The paint is not designed for high-heat applications.
- DO NOT USE ON TARMACADAM DRIVES, ROADWAYS etc. Use appropriate surfacing materials for these areas.
Cleaning: Clean brushes, spray equipment, and any spills immediately after use with Bartoline White Spirit.