Praxis Works Brodium Flat MTB Pedals - Silver

Yes, you can customize the traction by removing or re-positioning the pins to suit your riding style and preference.

While they are designed for MTB, they can technically be used on any bike with 9/16" crank threads, though they are quite wide and aggressive for road use.

You only need an 8mm Allen key to install or remove these pedals from your cranks.

It is recommended to check the specific retail packaging, but generally, spare parts should be sourced through an authorized Praxis Works dealer.

Yes, the internal Enduro cartridge bearings are standard sizes and can be replaced during a routine service.

Praxis Works designs these for rigorous trail use, but riders should always follow standard MTB weight guidelines for the entire bike setup.

The internal Enduro bearings may require a clean and re-grease or replacement. Inspect the seal to ensure no debris has entered the housing.

Check that the spindle is fully tightened to the crank arm. If the play is within the pedal body, the Igus bushing may be worn and require replacement.

Remove the pin, apply a fresh drop of thread-locking compound (Loctite), and reinstall securely.