PlastiKote Trade Permanent Spray Adhesive - 400ml

It can be used on paper, cardboard, wood, textiles, leather, cork, and various types of plastic. Always test on a small, inconspicuous area first, especially with plastics.

The adhesive is fast drying, allowing for handling and assembly shortly after application. Specific drying times can vary based on application thickness and environmental conditions.

While it provides permanent adhesion, it's best suited for indoor applications. Performance in direct sunlight or extreme weather conditions may vary. Always refer to product labeling for specific use cases.

Shake the can well before and during use. Hold the can upright at a consistent distance of 6-8 inches (15-20 cm) from the surface and apply in a steady, sweeping motion.

If the adhesive is still wet, carefully wipe it away with a clean cloth. If it has already dried, you may need to gently scrape it off or use a solvent recommended for adhesive removal, testing in a hidden area first.

Store the can in a cool, dry place, away from heat sources, sparks, and open flames. Ensure it is stored upright.

This adhesive creates a permanent bond, so repositioning is generally not possible once the items are pressed together. Ensure precise placement before bonding.

Shake the can more vigorously and ensure the nozzle is clear. If the problem persists, the can may be partially clogged or empty.

Ensure surfaces are clean, dry, and free of contaminants. Verify application distance and ensure an even coat. For difficult materials, a second light coat might be necessary.

Use adequate masking tape and paper to cover surrounding areas before application. Adjust spray distance and angle to minimize drift.

Invert the can after use and spray for 2-3 seconds to clear any residual adhesive from the nozzle. If already clogged, try cleaning with a suitable solvent (test in an inconspicuous area first).