US PRO INDUSTRIAL Diamond Metal Cutting Discs - 230mm - 9145
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the US PRO INDUSTRIAL Diamond Metal Cutting Disc (9145), offering a durable and efficient solution for cutting various metals. It provides up to 1,000+ cuts, significantly outperforming traditional discs. Note that while it cuts a wide range of metals, optimal performance depends on using the correct cutting technique and appropriate power tool.
All features
| Model Part Number | 9145 |
|---|---|
| Brand | US PRO INDUSTRIAL |
Extended Product Information
FAQs
What materials can this disc cut?
The disc can cut steel, stainless steel, cast iron, sheet metal, aluminum, and non-ferrous metals.
What is the disc's size?
The disc is 230mm in diameter, with a 22.23mm bore and a 2.2mm kerf thickness.
What is the maximum RPM?
The maximum RPM for this disc is 13,200.
Does this disc meet safety standards?
Yes, it conforms to the European EN 13236 safety standard.
What type of power tool is required?
The disc is designed for use with power tools compatible with bonded discs.
How should I store the disc?
Store the disc in a dry place, away from extreme temperatures and moisture.
What safety precautions should I take?
Always wear eye protection, gloves, and a dust mask or respirator. Work in a well-ventilated area.
How long will the disc last?
It is designed to deliver up to 1,000+ cuts, depending on the material and usage.
Troubleshooting
Disc is not cutting efficiently.
Check if the cutting pressure is too high. Reduce pressure and let the disc do the work. Also, ensure you are using the correct RPM settings for the material.
Disc is wearing down quickly.
Review the cutting technique. Ensure you are not forcing the cut. Check the material being cut; some materials may cause faster wear.
Excessive dust or odor.
Ensure adequate ventilation in the work area. Use a dust collection system if available. Check the material being cut as some materials produce more dust and odor than others.
The disc is making unusual noises.
Stop immediately and inspect the disc for damage or improper installation. Make sure the disc is correctly mounted and not damaged.
Pros and Cons
Pros
- Significantly longer lifespan compared to bonded discs.
- Suitable for a wide variety of metal cutting applications.
- Reduces dust and odor for a healthier work environment.
- Provides precise and controlled cuts.
- Durable construction enhances safety and longevity.
- Complies with European safety standards.
Cons
- May require adjustments in cutting technique compared to bonded discs.
- Performance is dependent on using the correct power tool settings.
- Requires proper safety gear during operation.
- The initial cost might be higher compared to some alternative cutting discs.
Setup, Compatibility & Care
- Tool Compatibility: The disc is designed for use with power tools compatible with bonded discs.
- Installation: Ensure the disc is correctly installed according to the power tool manufacturer's instructions. Verify that the disc is properly seated and secured before use.
- Safety Precautions: Always wear appropriate safety gear, including eye protection, gloves, and a dust mask or respirator. Work in a well-ventilated area.
- Cutting Technique: Apply even pressure during cutting and allow the disc to do the work. Avoid forcing the cut, as this can reduce the disc's lifespan and potentially cause damage.
- Care and Maintenance: After each use, inspect the disc for any signs of damage or wear. Store the disc in a dry place, away from extreme temperatures and moisture.