Timco Multi-Fix Concrete Screws - Yellow - 7.5 X 40mm

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete...

Best current price£0.98from Power Tools Direct

All Offers

89 offers from £0.98 - £18.94

View price history by clicking the chart icon.

Power Tools DirectTimco Yellow 00150Tconp Concrete Screws - Tx - Flat Countersunk - 7.5 X 150 Timpac 2
£5.95 delivery
£0.98
Visit shop
Tooled UpTimco Light/Yellow Multi Fix Countersunk Torx Concrete Screws
£5.95 delivery
£1.95
Visit shop
BradfordsTimco Tx30 Multi-Fix Concrete Screws 7.5 X 150Mm Zinc/Yell Pass - Pack Of 2 Light/Yellow
£25.00 delivery
£2.38
Visit shop
AmazonTimco Yellow Concrete Screws Flat Countersunk - 7.5 X 150
£4.49 delivery
£3.79
Visit shop
OnBuy.comTimco 00150Tconp Multi Fix Concrete Screw Zyp 7.5 X 150Mm Bag Of 2 5055331828446
Free delivery in 1–3 days
£4.21
Visit shop

Product Information

Full details

This guide is for professional tradespeople and DIY enthusiasts seeking a reliable anchoring solution. The Timco Multi-Fix Concrete Screws offer a rapid and effective method for securing fixtures in concrete, brick, and wood, replacing traditional fixings. Keep in mind that these screws are designed for light-duty applications.

All features

ColourYellow
Model Part Number00040TCON
BrandTimco

Extended Product Information

FAQs

What materials can I use these screws in?

These screws are suitable for use in concrete, brick, stone, concrete block, and wood.

What type of driver bit do I need?

You will need a TX30 TORX driver bit.

Do I need to pre-drill a hole?

Pre-drilling is recommended, especially in harder materials like dense concrete or hardwoods. The need for pre-drilling depends on the material being used.

Are these screws corrosion-resistant?

Yes, the screws are zinc plated and yellow passivated for increased corrosion resistance.

What is the benefit of the high-low thread?

The high-low thread on the first 30mm aids insertion and reduces torque, making installation easier.

What does the flat countersunk head do?

The flat countersunk head with five locking ribs ensures a flush finish.

Are these screws fire-resistant?

Yes, they are all steel, non-flammable fixings conforming to BS 7671 standards.

Troubleshooting

Screw is difficult to drive in.

Ensure you are using the correct size pilot hole. Check for obstructions in the hole. Apply more pressure and use a steady driving motion.

Screw head is stripping.

Use a TX30 driver bit in good condition. Apply sufficient downward pressure while driving the screw.

Screw is not flush.

Check if the screw is fully driven and not obstructed. Use a countersinking bit if necessary.

Pros and Cons

Pros

  • Rapid and efficient anchoring system.
  • Replaces traditional masonry fixings.
  • TX30 TORX drive recess for ease of use.
  • Increased corrosion resistance.
  • Suitable for fire-resistant environments.

Cons

  • Limited to light-duty applications.
  • May require pre-drilling in some materials.
  • Not suitable for heavy-duty load bearing.
  • Specific size limitations based on screw length.
  • Requires a TX30 driver bit.

Setup, Compatibility & Care

  1. Preparation:
  • Ensure the surface is clean and free of debris.
  • Pre-drill a pilot hole if necessary, depending on the material.
  1. Installation:
  • Insert the screw through the fixture into the pre-drilled hole.
  • Use a TX30 driver bit to drive the screw until the head is flush with the surface.
  1. Compatibility:
  • Compatible with concrete, brick, stone, concrete block, and wood.
  • Use appropriate drill bits and drivers.
  1. Care:
  • Avoid over-tightening the screws.
  • Store screws in a dry environment.

Similar items

Price History

DatePrice
Visit shop