Best current price£27.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£27.90Visit shop VEVOR Backwash Hose, 2 in x 50 ft, Heavy-Duty PVC Flat Pool Discharge Hose with Aluminum Camlock C & E Fittings, Clamps, Compatible with Pumps, Sand Filters, for Swimming Pools Waste Water Drain, Blue
Visit shop1 offer from £27.90
View price history by clicking the chart icon.
The VEVOR 2-inch by 50-foot backwash hose is an essential tool for pool owners, agricultural workers, and industrial operators who require a reliable and high-capacity drainage solution. Designed to handle high-pressure water discharge from sand filters and pumps, it offers a robust dual-layer construction that ensures longevity, though the 50-foot length requires careful management to prevent kinking during high-pressure operation.
| Model Part Number | wfctsl-07.in2ft500036LB |
|---|---|
| Brand | VEVOR |
No, this hose is designed for drainage and backwash purposes only and is not rated for drinking water transfer.
The hose has an operating pressure of 58 psi and a burst pressure rating of 174 psi.
Yes, the fittings are connected via stainless steel clamps and can be removed or replaced if necessary.
Yes, stainless steel clamps are included to ensure a secure connection.
Drain all water, coil it neatly, and store it in a dry, shaded location out of direct sunlight.
Check the rubber gasket inside the female camlock fitting for debris or damage and ensure the levers are fully locked in the closed position.
Ensure the hose is fully pressurized before flow starts; if a kink persists, manually straighten the hose and ensure there are no sharp bends in the layout.
Tighten the stainless steel clamps using a screwdriver or nut driver until the hose is firmly compressed against the fitting barb.
To set up the hose, insert the camlock male adapter into the female coupling and secure the lever arms firmly to lock the connection. Use the included stainless steel clamps to ensure the hose ends are tightly fastened to any barb or pipe fittings.
For care, always flush the interior with clean water after using it with pool chemicals or murky drainage water. Avoid dragging the hose over sharp rocks or jagged surfaces. When finished, drain the hose completely, coil it neatly, and store it in a cool, shaded area away from direct sunlight to prevent UV degradation of the PVC material.
