StoneCare4U Essential Masonry Sealer - Green
Protect stone surfaces from damage with the StoneCare4U Essential Masonry Sealer. This sealer is s...Protect stone surfaces from damage with the StoneCare4U Essential Masonry Sealer. This sealer is specifically designed for outdoor use on masonry, brick, and porous vertical stone surfaces. It contains resins that effectively seal and protect these surfaces, providing excellent water repellence and helping to prevent efflorescence, green growth, and algae growth. This sealer offers long-lasting protection and requires minimal maintenance once applied. It is a convenient and efficient solution for sealing masonry, blockwork, and brickwork, and it can be applied directly from the bottle. To apply the sealer, it is important to prepare the work surface by removing any loose debris. Additionally, ensure that you have the necessary safety wear, including gloves, suitable protective eyewear, an FFP3 class mask, and appropriate clothing. The application temperature should not be lower than 8 degrees Celsius. Before using the sealer, it is recommended to perform a small test application in an inconspicuous area to determine its suitability and effectiveness for your specific surface. How to apply: Before applying the sealer, make sure that the surface is completely clean and dry. You can use a low-pressure sprayer, roller, natural fibre brush, or sponge to apply the product. Apply the first coat generously, ensuring that the sealer penetrates the surface as much as possible. Once the first coat is applied, proceed to apply a second coat before the first coat has dried to ensure complete coverage. It is important not to dilute the sealer. The surface should be dry within 45 to 60 minutes after application. It is crucial to note that if rain is forecasted or starts during the application process, you should immediately stop the treatment and cover the freshly impregnated areas. The surface needs to remain completely dry for the first 6 hours after application. Please be aware that the sealer may subtly enhance the natural colour of the stone surface. Therefore, it is always recommended to test the product in an inconspicuous area before applying it to the entire surface. Additionally, any surfaces that are not intended to be sealed should be protected with masking material. Stonecare4U's Masonry Sealer is formulated with resins that seal and protect masonry surfaces whilst offering excellent water repellency and helping to reduce efflorescence, green growth and algae growth. It offers long-lasting protection and once sealed, the surface requires very little maintenance. It’s the quick and easy solution to sealing your masonry, blockwork and brickwork and it’s ready to apply straight from the bottle! MAINTENANCE: Sealed areas can be treated with mild, ph neutral cleaners or a very low concentration of our outdoor cleaner range. In short, please do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface. COVERAGE: Apply undiluted, up to 15m² per litre per coat. Dependant on the porosity of the surface. Check the surface after application of the Essential Masonry Sealer to ensure the full effectiveness of the repellent. Shield your stone from the elements with StoneCare4U Essential Masonry Sealer. This sealant is expertly formulated for outdoor masonry, brick, and porous vertical stone, delivering superior water repellency and protection against efflorescence, algae, and green growth. Its resin-rich composition ensures long-lasting protection with minimal upkeep. Apply directly from the container for convenient, efficient sealing of masonry, blockwork, and brickwork. Prep work is key: remove loose debris. Safety first! Wear gloves, protective eyewear, an FFP3 mask, and appropriate clothing. Maintain an application temperature above 8°C. Always test in an inconspicuous area first to check suitability. For application, ensure the surface is clean and dry. Use a low-pressure sprayer, roller, natural fibre brush, or sponge. Apply the first coat generously for deep penetration. Follow with a second coat before the first dries for complete coverage. Do not dilute. Expect drying within 45-60 minutes. Stop application immediately if rain threatens and cover treated areas. Keep the surface dry for the first 6 hours. Note: the sealer may subtly enhance the stone's natural colour-hence the importance of that test application. Protect unsealed areas with masking material.
Best current price£39.48from Building Materials
Best offers
Shopping.co.uk recommended and popular offers
Building Materials£39.48Visit shop ›Essential Masonry Sealer - 5L
Visit shop ›
B&Q£41.95Visit shop ›- Stonecare4U Masonry Sealer (5L)Protects Masonry & Brick Surfaces & Helps To Reduce EfflorescenceGreen Growth & Algae
Visit shop ›
