Best current price£22.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£22.99Visit shop Adept Technology White Underfloor Heating Edge Insulation Roll (50M Length) – Ufh Perimeter Foam Strip, Thermal Barrier, Prevent Heat Loss, Easy Install Lightweight Insulation, 100Mm X 8Mm X 50M
Visit shop4 offers from £22.99 - £23.99
View price history by clicking the chart icon.
This Adept Edge Insulation Roll is designed for homeowners and contractors installing underfloor heating (UFH) systems. Its primary benefit is minimizing heat loss at room perimeters and allowing for screed expansion, which prevents cracking and enhances UFH efficiency. A potential caveat is ensuring the correct width is selected for the specific installation depth. This roll is a crucial component for ensuring the longevity and optimal performance of both domestic and commercial UFH systems, offering thermal insulation and expansion gap protection through its high-quality, lightweight foam construction.
| Model Part Number | EDGE1508/50B |
|---|---|
| Brand | Adept Technology |
Its primary purpose is to prevent heat loss at the room's perimeter and to provide an expansion gap for the screed, preventing cracks.
This specific roll is 150mm in height, 8mm in thickness, and 50 meters in length.
Yes, this insulation roll is suitable for both water-based and electric underfloor heating systems.
You should choose a height that matches or slightly exceeds your intended screed depth to provide adequate coverage and expansion space.
It is recommended to secure the insulation to the wall with an appropriate adhesive or tape to ensure it stays upright during the screed pour.
Yes, it is suitable for bathrooms and other domestic or commercial wet areas, provided it is installed correctly within the screed layer.
By creating a thermal barrier at the perimeter, it minimizes heat loss outwards and directs more heat upwards into the room, making the system more efficient.
Use a sharp utility knife or a fine-toothed saw for cleaner cuts. Ensure the foam is well-supported while cutting.
Verify that the correct height of insulation was used for the screed depth. Ensure there are no other rigid points of restraint around the perimeter. Check the screed mix and curing process.
Confirm the insulation roll is properly sealed against the wall with no gaps. Ensure no thermal bridging occurs elsewhere (e.g., through pipes or structural elements).
Ensure the wall surface is dry and free of dust. Use an adhesive specifically recommended for foam insulation and the wall substrate.
Setup:
Compatibility:
Care:
