Milwaukee Inkzall Marker - Large Chisel Tip - Black

It can write on a wide variety of surfaces including concrete, wood, metal, plywood, plastic, wet, oily, dusty, and rusty surfaces.

The marker provides over 72 hours of cap-off time, meaning it can remain uncapped for an extended period without drying out.

The ink is designed for durability on various surfaces and is quick-drying to prevent smearing, but its permanence can vary depending on the surface type and environmental conditions.

Due to its large chisel tip, it is best suited for bold, visible markings and may not be ideal for very fine or intricate details.

Store the marker with the cap on securely in a cool, dry place away from direct sunlight and excessive heat.

The MPN (Manufacturer Part Number) for this Milwaukee Inkzall Large Chisel Tip Marker is 4932471555.

Yes, it features a built-in hard hat clip for convenient storage on workwear or gear.

Ensure the cap was securely on. Scribble on a rough surface to unblock the tip. Check if the surface is excessively wet or oily beyond the marker's capability. If the marker has been stored uncapped for a long time, the ink may have dried out.

Allow a slightly longer drying time before touching the mark, especially on very smooth or non-porous surfaces. Ensure the surface is not excessively wet or oily when marking.

Avoid applying excessive pressure on rough surfaces. If the tip is permanently damaged, the marker may need to be replaced.

Verify the cap is fully sealed after each use. Check the 'cap-off' time specification; while it's over 72 hours, prolonged exposure will eventually dry it out. Consider if the environment is unusually hot or dry.