Draper Tools TCT Router Bit 1/4" Rebate 32x12mm - 75344

This bit is suitable for use with a wide variety of hardwoods and softwoods.

A rebate, also known as a rabbet, is a recessed cut along the edge of a piece of wood, often used for joining.

Use a brush and appropriate cleaning solvent to remove resin and wood chips. Always wear gloves when cleaning the bit.

TCT stands for Tungsten Carbide Tipped. It refers to the material used for the cutting edges of the bit, known for its durability and sharpness.

Yes, this bit can be used with any router that accepts a 1/4" shank bit, including handheld models.

Always wear safety glasses and ear protection. Use a dust collection system. Ensure the workpiece is securely clamped and make shallow passes.

Generally, router bits are replaced as a whole. You can purchase this product from retailers that stock Draper Tools.

Reduce the router's feed rate or increase the router speed. Ensure the bit is sharp and clean. Make multiple shallow passes instead of one deep pass.

Check that the bit is securely tightened in the collet. Verify the router's depth setting is correct. Inspect the bit for any damage or wear.

Ensure the bit is clean and free of debris. Check for any damage on the bit itself. Make sure the workpiece is properly secured.