Best current price£171.26from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£171.26Visit shop VOLTCRAFT BS-3.9/1m QVGA Endoscope Accessories Probe Diameter 3.9mm
Visit shop3 offers from £171.26 - £206.00
View price history by clicking the chart icon.
The VOLTCRAFT BS-3.9 is a high-precision 1-meter endoscope camera probe designed for professionals and hobbyists who need to inspect tight, hard-to-reach areas in voltage-free systems. It provides clear QVGA resolution for detailed visual troubleshooting, though users should note it is strictly for non-acidic and non-alkaline liquid environments and requires a compatible VOLTCRAFT main unit to function.
| Brand | VOLTCRAFT |
|---|
The probe is rated for non-acidic and non-basic liquids. Check the chemical compatibility of the fluid; avoid highly corrosive substances.
Yes, the 1-meter neck is designed to be flexible enough to navigate around bends while retaining the shape you set for it.
No. The probe is strictly intended for use on voltage-free systems to prevent damage to the equipment and ensure operator safety.
The probe itself is just the camera component. Recording capabilities depend entirely on the features of the VOLTCRAFT main unit it is connected to.
Submerging the probe in acidic or basic liquids may damage the seals and degrade the camera housing, potentially leading to permanent failure.
Verify the connection between the probe and the main unit is fully seated. Check if the main unit is set to the correct video input mode.
Adjust the LED brightness control on the main unit. If the subject is too reflective, decrease the intensity; if too dark, increase it.
Ensure the lens is clean and free of water droplets or debris. Check if the object is within the optimal focus range of the lens.
Setup: To use the probe, ensure your VOLTCRAFT endoscope main unit is powered off. Connect the probe to the designated camera input port. Once secured, power on the main unit; the display should automatically detect the camera signal.
Compatibility: This probe is specifically designed for integration with compatible VOLTCRAFT endoscope main units. Verify your specific base model’s interface before purchase.
Care: After use in water or other permitted liquids, gently wipe the probe neck and lens with a soft, lint-free cloth. Do not use harsh chemical cleaners, as these may damage the outer coating. Store the probe in a cool, dry place, ensuring the gooseneck is coiled loosely to prevent internal wire stress.
