Power-TEC Push Pull Kit - Pneumatic - 92741
Best current price£526.83from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£526.83Visit shop PowerTec 92741 Push Pull Kit - Pneumatic
Visit shopAmazon£526.83Visit shop All Offers
3 offers from £526.83 - £663.44
View price history by clicking the chart icon.
eBayPower-TEC Pneumatic Push Pull Body Kit 5 Tonne Two Way Air inlet 1/4"" BSP 92741
Free delivery in 1–3 days
£573.49
Visit shop
Power-TEC Push Pull Kit - Pneumatic - 92741Free delivery in 1–3 days£663.44Visit shop →
Product Information
Full details
The Power-TEC Push Pull Kit (92741) is designed for automotive professionals and DIY enthusiasts needing a reliable pneumatic tool for tasks requiring controlled pushing or pulling forces. Its key benefit is enabling single-person operation for potentially heavy or awkward jobs, saving time and effort. A caveat is the requirement for a standard workshop air supply and adherence to its working pressure limits.
All features
| Model Part Number | 92741 |
|---|---|
| Brand | POWERTEC |
Extended Product Information
FAQs
What is the main advantage of using this pneumatic kit?
The main advantage is its ability to perform tasks requiring pushing or pulling force with a single operator, improving efficiency and reducing manual strain.
What type of air supply is required?
A standard workshop air compressor with an air line capable of supplying 0.8 Mpa working pressure and approximately 200 L/min air consumption is required.
How do I adjust the force applied by the tool?
The force can be adjusted using the included inner and outer force screw feet, which allow for fine-tuning the engagement and pressure applied.
Can I use this tool with different types of attachments?
Yes, the kit includes a variety of accessories such as extension bars, female threaded connection sleeves, adaptors, and chain adaptors to suit different applications.
What is the noise level of this tool?
The tool operates at a noise level of approximately 90dB, so hearing protection is recommended during use.
How is the tool stored and transported?
It comes supplied in a robust plastic case with strong over-centre latches, designed for secure storage and easy transport.
What are the lengths of the extension bars included?
The kit includes three extension bars with lengths of 200mm, 300mm, and 400mm.
Troubleshooting
Tool not applying sufficient force
Check air pressure is set to the correct working pressure (0.8 Mpa). Ensure air consumption requirements (200 L/min) are met by the compressor. Verify all connections are secure and not leaking. Ensure the correct force screw foot is being used for the application.
Air leaks detected
Inspect all connections, including the air inlet, extension bars, and adaptors. Tighten any loose fittings. Replace any worn or damaged seals or O-rings.
Difficulty attaching accessories
Ensure accessory threads are clean and free from debris. Check that you are using the correct corresponding fittings. Do not force connections; if resistance is met, re-align and ensure compatibility.
Tool operates erratically
Disconnect from air supply. Inspect for any obstructions in the air path or moving parts. Ensure the air supply is clean and dry.
Pros and Cons
Pros
- Enables single-handed operation, improving efficiency.
- Connects to common workshop air systems.
- Comes with a comprehensive set of accessories for varied tasks.
- Designed for straightforward assembly and use.
- Supplied in a protective and portable case.
Cons
- Requires an existing air compressor and air line.
- Operates at a noise level of 90dB, requiring hearing protection.
- Specific air consumption (200 L/min) needs to be met by the air supply.
- Maximum working pressure (0.8 Mpa) must not be exceeded.
Setup, Compatibility & Care
Setup:
- Ensure your workshop air supply is connected and operating within the specified parameters (0.8 Mpa working pressure, capable of delivering 200 L/min).
- Connect the tool's 1/4" BSP air inlet to your air line using appropriate fittings.
- Select and attach the required extension bar, adaptor, or chain adaptor based on your task.
- Use the inner or outer force screw foot to set the desired engagement.
Compatibility:
- Requires a standard workshop air compressor and air line.
- Air inlet is 1/4" BSP.
- Working pressure: 0.8 Mpa (approximately 116 PSI).
- Air consumption: 200 L/min.
Care:
- After use, disconnect from the air supply and clean any dust or debris from the tool and accessories using a dry or slightly damp cloth.
- Store all components in the provided robust plastic case to prevent damage and loss.
- Periodically check air lines and connections for leaks.
- Lubricate moving parts as per standard pneumatic tool maintenance guidelines if applicable.