Dremel Max Tungsten Carbide Carving Bit - 3.2mm

This Dremel Max carving bit is highly versatile and can be used on hard materials such as various metals (including hardened steel, aluminum, brass), fire ceramics, cast iron, plastics, hard woods, and also softwoods.

The Dremel Max 9903DM is a heavy-duty bit coated in Titanium Nitride, which makes it last 2 times longer and remove 20% more material than the standard 9903 carving bit. It is designed for more aggressive and demanding applications.

If the bit is chattering, increase the RPM of your Dremel Multi-Tool. Chattering is often a sign that the tool speed is too low for the material you are working on. Consult the recommended RPM chart within this guide for material-specific guidance.

While it is designed for precision, its heavy-duty and aggressive nature means it excels at material removal, shaping, and general carving. For extremely fine, delicate details, ensure you have excellent control and the appropriate RPM setting, or consider a less aggressive bit if extreme precision is paramount over material removal speed.

The shank diameter of the Dremel Max 9903DM Tungsten Carbide Carving Bit is 3.2mm (1/8 inch). It is compatible with all Dremel Multi-Tools that accept this standard shank size.

Despite its enhanced durability from the TiN coating, prolong its life by using appropriate RPMs for your material, avoiding excessive force, cleaning it after each use, and storing it properly in a dry place. Replace it when cutting edges become noticeably dull or damaged.

The cylindrical shape allows for deep material removal, cutting flat areas, rounding edges, making stop cuts, and creating V-cuts. Additionally, the accessory tip enables round bottom slots, grooves, round side cuts, and V-cuts when held at a 45-degree angle.

Increase the RPM (Revolutions Per Minute) of your Dremel Multi-Tool. Chattering often indicates insufficient speed for the material being worked on. Refer to the 'Recommended Speed (RPM)' table for appropriate settings for your specific material.

Ensure you are using the sides of the accessory head at an angle less than 90 degrees, allowing the bit to cut effectively. Also, check that you are not forcing the tool; let the bit do the work. Verify that the RPM setting is appropriate for the material, potentially increasing it within the recommended range.

Before operation, ensure the collet nut is fully tightened after inserting the bit. Make sure the bit's shank is inserted deeply and squarely into the collet. If the collet is worn or damaged, it may need to be replaced to ensure a secure grip.