Best current price£21.83from eBay
Shopping.co.uk recommended and popular offers
eBay£21.83Visit shop HETTICH Corner Cabinet Hinge Folding Door Intermat 50-65 Nickel Plated 52 x 2
Visit shop1 offer from £21.83
View price history by clicking the chart icon.
This HETTICH Corner Cabinet Hinge from SPARES2GO is designed for cabinet makers and DIY enthusiasts working with corner cabinet folding doors that do not require a self-closing mechanism. Its key benefit is the precise adjustment capabilities, allowing for a perfect door fit and alignment. A caveat to note is its lack of an integrated self-closing feature, though it is compatible with systems that do. The hinge offers a 50°/65° opening angle, accommodates door thicknesses from 15-21mm, and features multiple adjustment options for overlay, depth, and height via the mounting plate.
| Colour | Silver |
|---|---|
| Model Part Number | 9930 |
| Brand | SPARES2GO |
No, this specific HETTICH Intermat 9930 hinge model does not have an integrated self-closing feature. However, it is compatible with systems that do provide this function.
The hinge is suitable for doors with a thickness ranging from 15 mm to 21 mm.
This hinge requires a TH-Drilling pattern of 52 x 5.5 mm for pressing into the door.
The hinge features integrated diagonal adjustment (+9.5 mm / -9.5 mm) and overlay adjustment. Height adjustment is also available at the mounting plate, allowing for precise door alignment.
The hinge is constructed from steel and nickel-plated die-cast zinc for durability and corrosion resistance.
Yes, it is compatible with Hettich Nickel (Sensys 8645i) 9071208.
This pack contains 2 hinges.
Ensure the hinge is properly seated and all adjustment screws are not overtightened. A tiny drop of light machine oil (like 3-in-1) can be applied to the pivot points, but avoid over-lubrication.
Utilize the integrated overlay, diagonal, and mounting plate height adjustments. Refer to the Hettich installation guide for detailed adjustment procedures.
Verify that the door is prepared with the correct TH-Drilling pattern (52 x 5.5 mm) and the hinge cup depth (12.8 mm) is accounted for. Ensure the correct drilling jig or measurements were used during preparation.
Check the overlay and diagonal adjustment settings. Ensure the mounting plate is securely fastened and properly aligned. If a soft-close function is desired, ensure a compatible system is installed separately, as this hinge does not have it built-in.
Setup:
Compatibility:
Care:
