Hairpin Leg For Furniture - Black

The weight capacity depends on the rod diameter (10 MM or 12 MM), the tabletop material, and how the legs are attached. The 12 MM diameter legs are generally recommended for heavier loads. Always ensure secure mounting.

No, screws or fasteners are not included. You will need to purchase appropriate screws based on your tabletop material and thickness.

Typically, four legs are used for standard tables. For longer tables or benches, you may need to add a third or fourth leg in the center for added stability.

These legs are designed primarily for indoor use. Prolonged exposure to moisture and weather can lead to rust and damage the finish. For outdoor use, consider specially treated or coated furniture legs.

The height of the hairpin leg is 406 MM.

While possible, painting or refinishing may void any manufacturer warranty and requires proper surface preparation. If you choose to do so, use a metal primer and paint suitable for steel.

Ensure all screws are fully tightened into the tabletop. Check that the tabletop itself is rigid. For very large or heavy tables, consider using 12 MM legs or adding more legs for support.

Verify that you are using screws of the correct length and type for your tabletop material. If using wood, ensure the screws are going into solid material and not just a thin veneer. Consider using wood filler or anchors for re-drilling if holes are stripped.

The plastic foot can be carefully pried off and replaced. Look for compatible furniture feet replacements or small rubber glides at hardware stores.