SecureFix Direct Swivel Eye Bolt With Link - M24 - 3.15 Ton

The Safe Working Load is 3.15 tons (3150 kg) when lifting vertically (at 0 degrees). The SWL decreases when lifting at an angle.

It is manufactured from high-strength Grade 80 steel.

Yes, this product conforms to BS EN 1677.

While the swivel feature allows for lifting from various angles, it is primarily designed for vertical lifts. Side loading can significantly reduce its capacity and should be avoided or handled with extreme caution and appropriate load calculations.

The thread size is M24.

It should be inspected before each use and periodically for signs of wear, damage, or corrosion. Regular professional inspections are also recommended for safety-critical equipment.

The product has a factor of safety of 4:1.

Ensure the M24 threads on both the bolt and the receiving hole are clean and free from damage. Verify you are using the correct M24 size and that the receiving material is adequate for the load.

Immediately remove the eyebolt from service. Do not use damaged lifting gear. Inspect the cause of the damage and replace the eyebolt if compromised.

Check for debris or obstructions around the swivel mechanism. If the issue persists, the unit may require professional inspection or replacement.

Clean the affected area with a wire brush. If corrosion is significant or has weakened the material, the eyebolt should be replaced.