EarthQuaker Devices Silos Multi-Generational Time Reflection Effects Pedal
The EarthQuaker Devices Silos Multi-Generational Time Reflection Device merges a digital, analog, ...The EarthQuaker Devices Silos Multi-Generational Time Reflection Device merges a digital, analog, and tape delay into one compact and powerful pedal. In addition to the tri-voice delay, it features tap tempo, user-assignable expression control, and the ability to save and recall six presets, making it endlessly customizable and easy to operate. It’s like having three classic pedals all rolled into one. Now you can save room on your pedalboard while never having to decide which single delay to use again. 3 Modes of Impeccable Sounding Delay Each of the three modes offers up to one second of delay time. From noon and back is 500 milliseconds to zero, which has its character. From 500 milliseconds to one second of delay time, it’s an entirely different beast. Dial them in for shorter delay times where they excel and add loads of atmosphere and vibes. Push them further for rhythmic delays that are perfect for strumming and adding extra ambiance to your riffs. Each of the three delay modes is uniquely different and offers its unique character when selected. Mode D refers to Digital Delay. This mode offers bright repeats that remain strong as they decay. Shorter settings give you a bold stuttering staccato sound, while longer settings give you ambiance with longer repeats. Mode A refers to Analog Delay. This mode is very mid-focused with faster diminishing repeats and dark and murky build ups. Boasting a big presence without low end throb or overpowering high end, this works equally well with a clean signal or distortion. Mode T refers to Tape Delay. Reminiscent of a well-loved tape delay with just a hint of oil can delay vibes mixed in for good measure. Roll it on for everything from dark undertones to atmospheric terrains. Presets Silos has six available preset slots for you to save and recall your favorite settings. The settings for each of the three controls, the mode switch, and the expression jack assignment can be saved and recalled in any of the slots. Operating Modes Silos has two operating modes which are indicated by the color of the Save or Recall switch LED. In Live mode, the pedal will operate exactly where the controls are set and any changes will have no effect on the presets unless saved. In Preset mode, stored presets, including expression pedal mapping, are selected using the Preset switch, and the physical settings of the controls will be ignored.
The EarthQuaker Devices Silos is designed for guitarists and bassists seeking versatile, multi-generational delay effects in a single, pedalboard-friendly unit. Its key benefit is combining digital, analog, and tape delay sounds, offering extensive sonic customization. A potential caveat is the learning curve associated with mastering its three distinct delay modes and preset management.
All features
Model Part Number
Silos
Brand
EarthQuaker Devices
Extended Product Information
FAQs
Can I use the Silos with both guitar and bass?
Yes, the EarthQuaker Devices Silos is designed to work effectively with both guitar and bass signals.
What type of power supply does the Silos require?
The Silos requires a standard 9-volt DC power supply with a center negative polarity and a current draw of at least 150mA.
How many presets can I save on the Silos?
The Silos features six user-assignable preset slots where you can save your favorite settings.
What is the maximum delay time available?
Each of the three delay modes offers up to one second (1000 milliseconds) of delay time.
Can I control parameters like feedback or delay time with an expression pedal?
Yes, the Silos features an expression jack that allows user-assignable control over various parameters, including feedback and delay time. The specific assignment can be saved within presets.
How do I switch between Live mode and Preset mode?
Press the Save/Recall switch once to toggle between Live mode (controls are active, LED may be a different color or off) and Preset mode (saved presets are recalled, LED indicates Preset mode). Repeated presses cycle through the modes.
Does the Silos have stereo outputs?
No, the EarthQuaker Devices Silos is a monaural (mono) effects pedal and features a single output.
Troubleshooting
No sound when pedal is engaged.
Check that the power supply is connected and providing sufficient current. Verify that instrument cables are securely plugged into the correct input and output jacks. Ensure the effect is not bypassed (check the LED status).
Excessive noise or hum.
Try a different power supply, preferably a regulated one, to rule out power noise. Ensure all audio cables are in good condition and properly shielded. Check for interference from other electronic devices.
Tap tempo is inaccurate.
Ensure you are tapping the Save/Recall switch at a consistent tempo. If using Preset mode, make sure the controls are set as intended for the selected preset. Recalibrate your tapping speed to match the desired tempo.
Presets are not saving or recalling correctly.
Confirm you are in Live mode (default) when saving. Ensure you have pressed and held the Save/Recall switch until the LED blinks before selecting a preset slot. When recalling, ensure you have switched to Preset mode by pressing the Save/Recall switch once.
Pros and Cons
Pros
Consolidates three distinct delay types into one pedal, saving space.
Highly customizable with tap tempo, expression control, and presets.
Each delay mode offers a unique sonic character suitable for various musical styles.
Durable construction typical of EarthQuaker Devices pedals.
Intuitive controls when operating in Live mode.
Cons
The nuanced differences between modes might require time to fully appreciate and utilize.
Preset management, while powerful, can have a slight learning curve.
Maximum delay time is limited to one second, which might be insufficient for very long echo effects.
No dedicated stereo output.
Setup, Compatibility & Care
Setup:
Connect a standard 9-volt DC power supply (center negative, at least 150mA) to the power jack.
Connect your instrument's output to the INPUT jack and the pedal's OUTPUT jack to your amplifier or the next pedal in your signal chain.
Use the footswitch to engage or bypass the effect. The LED indicates when the effect is active.
To save a preset, adjust controls to your desired sound, press and hold the Save/Recall switch until the LED blinks, then press one of the six preset locations (indicated by foot switches).
To recall a preset, press the Save/Recall switch to enter Preset mode (LED color changes), then tap the desired preset footswitch.
Compatibility:
The Silos is a monaural (mono) pedal and is compatible with standard mono instrument cables.
It functions with both guitar and bass signals.
It is compatible with most standard 9-volt DC power supplies. Always ensure your power supply meets the current and polarity requirements to avoid damage.
Care:
Keep the pedal away from excessive moisture and extreme temperatures.
Clean the exterior with a dry or slightly damp cloth. Avoid abrasive cleaners.
Ensure all connections are secure to prevent signal loss or noise.