Best current price£18.89from eBay
Shopping.co.uk recommended and popular offers
eBay£18.89Visit shop Q.Max Sheet Metal Punch 19Mm QMA19M
Visit shop
B&Q£21.38Visit shop B&Q - Q Max Sheet Metal Punch 19mm Anti-Corrosive Surface Finish
Visit shop3 offers from £18.89 - £21.38
View price history by clicking the chart icon.
The Q.Max 19mm Sheet Metal Punch is an essential tool for electricians, metalworkers, and DIY enthusiasts who need to create precise, clean holes in sheet metal up to 16 gauge. Its primary benefit is the ability to produce perfectly round, burr-free holes without the need for manual filing or finishing, significantly speeding up panel and enclosure installations. However, users should be aware that the punch is sold as a single unit and requires a separate hexagonal wrench for operation, and it does not include a tightening key in the package.
| Model Part Number | 19mm |
|---|---|
| Brand | Q.Max |
No, the punch is sold as a single unit and does not include a key. You will need to source a separate tool or use an 8mm hexagonal wrench.
No, this punch is specifically rated for sheet metal up to 16 gauge. Using it on thicker material may damage the punch.
No, the Q.Max punch is designed to create a burr-free hole, meaning no secondary finishing is required.
The pilot hole must be large enough to allow the hexagonal screw to pass through; typically, this is slightly larger than the diameter of the screw threads.
The tool features a black anti-corrosive finish, but it is recommended to keep it in a dry, clean space and wipe it down with a light coat of oil if stored for long periods.
Apply a small amount of machine oil to the screw thread and ensure the punch is aligned perfectly square with the metal surface.
Verify that the material is not thicker than 16 gauge and check that the pilot hole size is appropriate for the screw diameter.
Inspect the cutting edges for buildup; clean thoroughly with a wire brush, but avoid abrasive grinding which may damage the heat-treated edges.
To ensure consistent results, always confirm that your sheet metal does not exceed the 16 gauge thickness limit. The punch is compatible with an 8mm hexagonal wrench.
Setup Steps:
Care Instructions:
