Everbuild Tarmac Restorer - 5L - TARR5

Coverage can vary depending on the surface condition and porosity of the tarmac. Refer to the product label for specific coverage details.

No, the surface must be completely dry before application.

The longevity depends on factors like weather conditions and traffic. Typically, the finish lasts for several years.

Use a suitable tarmac cleaner to remove dirt, oil, and loose debris. Rinse thoroughly and allow the surface to dry.

No, this product is specifically designed for use on tarmac surfaces.

The surface is typically dry to the touch within 4 hours, but full curing may take longer.

It's generally recommended to apply two thin coats for best results, allowing the first coat to dry before applying the second.

Ensure thorough surface preparation. Apply the restorer evenly and avoid applying too much product in a single coat. Consider applying a second coat.

Ensure proper ventilation and that the surface is completely dry before application. Check the temperature and humidity levels.

Ensure the product has fully dried and cured. Apply in thin coats. If the issue persists, consider applying a non-slip additive.