Smartseal Brick Sealer - 1L - Clear

Coverage is approximately 5m² per litre, but can reach up to 10m² per litre on specialist surfaces.

It is touch dry in 2-3 hours and becomes water-resistant within 24 hours.

While it can be used indoors, it is primarily designed for exterior surfaces. Consider the ventilation in interior spaces.

It provides long-lasting damp-proofing protection for up to 10 years.

No, it is designed to be applied in a single coat for optimal performance.

It can be used on brickwork, cement, walls, concrete, and facades, both indoors and outdoors.

The surface should be clean, dry, and free from loose debris, moss, algae, and existing coatings. Clean thoroughly with a suitable cleaner if necessary.

Yes, it is solvent-free, making it a more environmentally friendly option.

Ensure the surface was adequately prepared before application. Reapply the sealer if necessary, following the preparation guidelines.

Ensure even coverage during application. Avoid applying too much sealer in one area. If needed, apply a second coat after the first has dried.

This may be due to application in excessively damp conditions. Ensure the surface is completely dry before application and avoid application if rain is expected within 24 hours.