Screwdriver Bits - PH2 - 75mm - 5 Piece

These bits are specifically designed for use with impact drivers and drill drivers that accept a 1/4" hex shank. They are impact-rated for best performance with impact drivers.

PH2 refers to the Phillips head screw size, specifically Phillips #2. These bits are designed to fit and drive Phillips #2 screws.

They are made from S2 steel, which is known for its hardness and durability, making them more resistant to wear and breakage compared to standard steel bits, especially when used with impact drivers.

The 75mm length provides extra reach, allowing you to drive screws in recessed areas or spaces where a standard-length bit would not fit comfortably.

The bits come in a convenient, organized Tic-Tac dispenser that helps keep them secure and easily accessible, and the color-coding aids in quick selection.

Yes, you can use them with a standard drill, but they are optimized for the higher torque applications often encountered with impact drivers. For high-torque drilling, ensure your drill is capable and use appropriate settings to avoid damaging the bit or screw.

Keep the magnetic tip clean by wiping away metal filings or dust. Store the bits in their dispenser when not in use to protect the magnet and prevent loss.

Ensure the magnetic tip is clean and free from metal shavings or debris. The magnetic strength may also diminish over extended periods of heavy use.

Verify that you are using the correct bit size (PH2) for the screw head. Ensure the bit is fully seated in the impact driver and that the driver is operating within its intended torque limits. Using the bit with a standard drill driver at high torque can also cause damage.

Confirm you are using the 75mm length bits. For even more challenging access, consider specialized extension adapters if available.