Best current price£11.12from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£11.12Visit shop Floplast White Deepflow/ Hi-Cap Gutter Angle - 90 Degree X 115Mm X 75Mm
Visit shop1 offer from £11.12
View price history by clicking the chart icon.
This guide is for homeowners and contractors looking to manage roof drainage effectively. The FloPlast 90 Degree Gutter Angle in White offers a durable and straightforward solution for changing gutter direction around building corners, preventing leaks and overflow with its Hi-Cap design. A key consideration is the need for proper fascia bracket support to ensure long-term stability.
| Model Part Number | RAH1W |
|---|---|
| Brand | FloPlast |
Yes, the FloPlast 90 Degree Gutter Angle features a symmetrical design, meaning the same fitting can be used for both internal (concave) and external (convex) corners.
The clip holds the rubber seal firmly in place within the fitting, ensuring a watertight connection between the gutter sections and the angle, and simplifies the installation process.
You must support the gutter angle by positioning a fascia bracket within 150mm on both sides of the fitting. This prevents stress and sagging, especially under the weight of water or snow.
This angle is specifically designed for the FloPlast Hi-Cap 115mm gutter system. While it may fit other systems, it is best used with components from the same FloPlast Hi-Cap range for optimal performance and sealing.
The Hi-Cap system offers improved water capacity compared to standard gutter systems, which helps to prevent overflow and leaks, especially during heavy rainfall.
It is recommended to clear debris from gutters and angles at least twice a year, typically in late spring and late autumn, to ensure proper water flow and prevent blockages.
Ensure the gutter seal is correctly seated and the retaining clip is fastened. Reapply silicone sealant to the joint if necessary and ensure the gutter sections are pushed fully into the fitting.
Verify that fascia brackets are installed within 150mm on both sides of the angle fitting. Insufficient support is the primary cause of sagging.
Check for any obstructions or debris inside the angle fitting or on the ends of the gutter sections. Ensure you are using the correct size gutter compatible with the 115mm system.
Setup:
Compatibility:
Care:
