Hotforge Hybrid Quickdraw - Black Diamond

The HotForge carabiner features a snag-free keylock nose designed for easy attachment to anchors, while the HotWire carabiner is a lightweight wiregate designed for easy rope clipping. The HotForge has a gate opening of 22mm, and the HotWire has a gate opening of 27mm.

The Straitjacket insert is a rubber or TPU piece integrated into the dogbone that keeps the bottom carabiner (the HotWire) in its optimal clipping position, preventing it from swinging around and making rope clipping easier and more efficient.

Both the HotForge and HotWire carabiners have a closed gate strength of 24 kN, an open gate strength of 8 kN, and a minor axis strength of 8 kN.

The dogbone is made of 18mm wide polyester, which is known for its durability and resistance to UV degradation.

Yes, the combination of a snag-free anchor carabiner and an easy-clipping rope carabiner makes it suitable for various climbing disciplines, including trad climbing where efficiency at placements is important.

A 12cm Black Diamond HotForge Hybrid Quickdraw weighs approximately 99 grams.

The carabiners are made from 7075 aluminum, with 25% of the aluminum being pre-consumer recycled content, contributing to a reduced environmental footprint.

Clean the gate mechanism with water and mild soap to remove grit. Lubricate lightly with a silicone-based lubricant designed for climbing gear, ensuring excess is wiped away. If stiffness persists, inspect for damage.

Inspect the insert for tears or separation. If the insert is compromised, the quickdraw should be retired from climbing use as it affects carabiner orientation and safety.

Minor superficial wear may be acceptable, but significant fraying, cuts, or abrasion indicates the dogbone is compromised. The entire quickdraw should be retired from climbing use.

Check for obstructions in the gate channel. Ensure the spring mechanism is functioning correctly. If the gate fails to close and lock reliably, the carabiner is unsafe and the quickdraw must be retired.