British General 20A 2 Way 2 Gang Double Light Screwless Switch - Bronze

2-way switching allows you to control a light from two different locations. For example, you can turn a light on at the bottom of the stairs and off at the top, or vice versa. This requires two 2-way switches wired together.

No, this is a single double light switch unit. If you wish to implement 2-way switching, a second compatible 2-way switch must be purchased separately.

Use a soft, slightly damp cloth to wipe the surface. Avoid harsh chemicals, abrasive pads, or cleaning sprays, as these can damage the finish. Dry with a clean, soft cloth.

Yes, this switch is suitable for use with most LED lighting circuits. Ensure the total wattage of the LEDs does not exceed the switch's rating.

This switch is designed to fit a standard UK single-gang backbox. A minimum depth of 25mm is recommended.

The screwless front plate is designed to clip on and off. To remove it, you may need to carefully insert a flat-head screwdriver into a small notch (if present) or gently lever the plate away from the wall at the edge using a suitable tool.

Check that the power supply is switched on at the consumer unit. Verify all wire connections are secure and correctly placed according to the wiring diagram. Ensure the correct switch is being operated if using 2-way switching.

Loose wiring connections are the most common cause. Turn off power and re-check all connections. Ensure the bulb type is compatible and not nearing the end of its life. If the issue persists, the switch may be faulty.

Ensure the main switch module is correctly seated in the backbox. Align the plate carefully and apply even pressure. For removal, gently pry at the indicated notch (if present) or use a flat-head screwdriver to carefully lever it off.