Unifix Class 8 Full Nuts & Washers - M20 - Silver
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and construction professionals seeking reliable fastening solutions. The Unifix Class 8 Full Nuts & Washers provide a secure and durable connection for a variety of projects, offering enhanced corrosion resistance. While versatile, their M20 size is specific and may not suit all applications.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 5014196545387 |
| Brand | Unifix |
Extended Product Information
FAQs
What does "Class 8" mean for these nuts?
Class 8 refers to the strength class of the nut, indicating its mechanical properties and suitability for higher load applications compared to lower classes. It ensures a reliable and strong connection.
What is BZP plating?
BZP stands for Bright Zinc Plating. This is a common surface treatment that provides a bright, shiny finish and offers good resistance to corrosion and rust.
Can these be used outdoors?
Yes, the BZP coating provides corrosion resistance, making them suitable for many outdoor applications. However, for extremely harsh or constantly wet environments, additional protective measures or coatings might be considered over the long term.
What size wrench do I need for an M20 nut?
Typically, an M20 nut requires a 30mm wrench or socket size.
Are these nuts and washers sold separately?
This specific product is a set containing both M20 Class 8 Full Nuts and Form A Washers. They are packaged together for convenience.
How should I store these fasteners?
Store them in a cool, dry place away from direct moisture to maintain the integrity of the BZP coating and prevent corrosion.
Can I use these with any M20 bolt?
These nuts are designed for standard M20 metric threads. Ensure your bolt or threaded rod has the corresponding M20 threading for a proper fit.
Troubleshooting
Nut does not thread onto bolt smoothly.
Ensure you are using an M20 bolt of the correct thread pitch and that both the bolt and nut threads are clean and free from debris or damage. Verify you are not cross-threading.
Washer feels loose or is not seating properly.
Confirm that the washer is the correct size for the bolt and that the bolt head or nut is not excessively large or misshapen. Ensure the surface it's pressing against is flat.
Visible rust or corrosion forming.
While BZP offers good resistance, prolonged exposure to moisture or corrosive substances can cause rust. Clean the affected area and consider applying a suitable rust inhibitor or protective coating if the environment is particularly harsh.
Stripped threads on nut or bolt.
If threads are stripped, the nut or bolt must be replaced. Ensure proper tightening techniques are used in the future to avoid stripping.
Pros and Cons
Pros
- High corrosion resistance due to BZP coating.
- Class 8 rating ensures reliable and strong fastening.
- Washers included to protect surfaces and distribute load.
- Suitable for a wide range of construction and DIY tasks.
- Convenient for projects requiring specific M20 hardware.
Cons
- M20 size is specific and not universally compatible.
- BZP coating may wear over time in highly abrasive environments.
- Not designed for extreme temperature or chemical exposure.
- Requires appropriate M20 bolts for complete assembly.
- Bag quantity may be insufficient for very large projects.
Setup, Compatibility & Care
Setup: These nuts and washers are designed for straightforward installation. Simply slide the Form A washer onto the bolt or threaded rod, followed by the M20 nut. Tighten using an appropriate wrench or socket size for M20 nuts (typically 30mm). Ensure the bolt or thread is clean and free from damage for optimal engagement.
Compatibility: These M20 nuts and washers are compatible with M20 bolts, screws, and threaded rods that adhere to standard metric threading specifications. They are intended for use with applications requiring a Class 8 fastening strength.
Care: To maintain the integrity and corrosion resistance of the BZP coating, avoid abrasive cleaners or tools that could scratch the surface. If used in harsh environments, periodically check for signs of wear or corrosion. Store in a dry place to prevent premature degradation of the plating.