Best current price£6.07from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£6.07Visit shop Faithfull Hcs Hinge Boring Bit 26Mm X 60Mm
Visit shop
B&Q£10.13Visit shop B&Q - Hcs Hinge Boring Bit 26mm X 60mm Faihbb26Hcs
Visit shop28 offers from £6.07 - £14.99
View price history by clicking the chart icon.
This guide is for woodworkers and cabinet makers needing precise blind holes for concealed hinges. The Faithfull High Carbon Steel (HCS) Hinge Boring Bit delivers clean, accurate bores essential for professional cabinet installations. A key caveat is that HCS bits are not ideal for high-volume repetitive tasks on man-made boards and perform best with a drill press.
| Model Part Number | FAIHBB35HCS |
|---|---|
| Brand | Faithfull |
This bit is specifically designed for installing concealed hinges, such as Blum hinges, which require a precise blind hole (cup hole).
The bit has an 8mm shank, which fits most standard drill chucks. However, for best results and accuracy, it is recommended for use with a stand-mounted drill or drill press.
It is suitable for all types of natural woods and engineered materials including blockboard, melamine faced boards, chipboard, and MDF.
No, high carbon steel hinge bits are not recommended for repetitive tasks on man-made boards. For such applications, consider a carbide-tipped bit.
Clean the bit after each use to remove debris. Store it in a dry environment and consider applying a light coat of oil for protection.
Different sizes are designed for different hinge cup diameters. The 35mm size is common for many standard concealed hinges, but other sizes are available for specific hinge models.
Ensure the bit is sharp. Check drill speed; a slower speed with steady pressure is often better. Make sure the material is properly supported and use a drill press for optimal control.
Adjust the depth setting on your drill press or mark the required depth on the bit and monitor manually. Ensure you are applying consistent pressure.
Ensure the bit is securely clamped in the drill chuck. Use a drill press for greater stability and accuracy. Ensure the material is firmly secured to prevent movement.
Setup: Securely insert the 8mm shank into the chuck of your drill or drill press. Ensure it is tightened firmly. For best results, use with a drill press. Set the desired drilling depth if your drill press has a depth stop.
Compatibility: The 8mm shank is compatible with most standard drill chucks, including those found on handheld drills and drill presses. The 35mm diameter is standard for many concealed hinge systems, particularly Blum types.
Care: After use, clean the bit to remove any wood dust or debris. Store in a dry place to prevent rust, as high carbon steel can corrode. Applying a light oil can help protect the bit during storage. Avoid abrasive cleaners.
