DP Building Systems Data Transfer Adapter - USB A Male to Type C Female

The adapter supports a maximum data transfer speed of 5Gbps when used with compatible USB 3.1 devices and ports.

No, this adapter is designed for data transfer between USB Type-A and USB Type-C devices. It does not convert USB Type-A to DisplayPort or USB Type-C video output.

It is compatible with USB Type-C devices that support DisplayPort Alternate Mode or USB 3.1. Specific compatibility with Mac (Thunderbolt 3) and Chromebooks is highlighted.

OTG (On-The-Go) allows USB devices, like smartphones or tablets with USB Type-C ports, to act as a host, enabling them to connect to USB peripherals like flash drives or keyboards.

The maximum resolution supported by this adapter is 1920 x 1080 pixels (Full HD) at 60 Hz. It is not designed for resolutions higher than this.

While it enables data transfer, its primary function is not power delivery. Charging capabilities depend on the host device's USB Type-C port specifications and the connected device.

The cable length is very short, measuring approximately 0.03 meters (3 cm).

Ensure the USB Type-C device is properly connected to the adapter and the adapter is securely plugged into the host device. Try a different USB Type-C port on your host device if available. Verify your host device supports DisplayPort over Type-C or USB 3.1.

Confirm that both the host device and the connected USB Type-A device support USB 3.0 or higher. Ensure the USB Type-C port on the host device supports 5Gbps speeds. Check for any software or driver conflicts on the host device.

Check for any physical damage to the adapter or the cables. Ensure the gold-plated connectors are clean and free of debris. Try connecting to a different port or device to isolate the issue.