Best current price£47.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£47.99Visit shop Maxrieny Acm92 Dc Ac Clamp Meter 6000 Counts True Rms Digital Multimeter Amp Resistance Frequency V-Alert Continuity Voltage Tester
Visit shop5 offers from £47.99 - £67.05
View price history by clicking the chart icon.
This MAXRIENY clamp meter is designed for electricians and technicians requiring highly precise AC/DC current measurements, particularly for low-level current detection like parasitic draws, thanks to its 1mA resolution. Its dual-line HD display offers simultaneous readings of voltage/frequency or temperature, and features like LoZ mode and V-Alert enhance diagnostic capabilities. While portable and convenient with a back clip, users must be mindful of the correct procedure for zeroing and maintaining orientation when measuring DC current due to the Hall effect sensor.
| Model Part Number | ACM91 |
|---|---|
| Brand | MAXRIENY |
The 1mA resolution allows for very precise measurement of small AC and DC currents, which is essential for tasks like detecting tiny parasitic drains in vehicles or monitoring low-power electronic devices.
Before measuring DC current, ensure the clamp is open and closed several times to zero the reading. It is critical to maintain the same orientation of the meter relative to the conductor for all subsequent DC current measurements, as the Hall effect sensor is sensitive to direction.
The Low Impedance (LoZ) mode is designed to help identify and eliminate ghost or stray voltages that can be induced in conductors, leading to more accurate and reliable voltage readings, especially in complex or unshielded wiring.
Yes, the dual-line HD display allows you to view AC voltage and frequency at the same time, providing more context for electrical measurements.
No, the V-Alert function can be activated as needed for an enhanced testing experience, providing an additional layer of non-contact voltage detection.
It is designed for portability, being pocket-sized and featuring a back clip that allows it to be easily attached to belts or pockets for convenient access during work.
It can measure temperature in both Celsius and Fahrenheit, typically when used with a compatible thermocouple probe (often sold separately).
Check and replace the batteries. Ensure the batteries are inserted correctly.
Ensure the meter is properly zeroed before each DC current measurement. Maintain consistent meter orientation during measurement. Check for strong external magnetic fields that might interfere with the Hall effect sensor.
The measured value exceeds the selected range. Switch to a higher range or select a different function.
Verify that the correct thermocouple probe type is being used and is properly connected. Ensure the probe is suitable for the temperature range being measured. Allow time for the probe to acclimate to the measurement environment.
Ensure the LoZ function is activated. Note that LoZ mode may reduce sensitivity compared to standard voltage modes. Verify test lead connections.
Setup:
Compatibility:
Care:
