Hangman Flush Hanger - White - 30cm

The Hangman Flush Hanger has a maximum load capacity of 13kg (approximately 28.7 lbs).

Yes, the 30cm hanger includes the necessary screws for mounting.

While primarily designed for framed art, it could potentially be used for lightweight mirrors with a suitable frame lip, provided the weight limit is not exceeded.

It is suitable for most standard wall types. However, for optimal security, especially on drywall, it is recommended to use appropriate wall anchors (not always included).

The hanger is designed to hold the bottom edge of the artwork very close to the wall, creating a seamless appearance with minimal gap. The artwork typically rests on the hanger's profile.

The integrated spirit level provides a convenient guide for achieving a level hang. For critical installations, cross-referencing with a separate spirit level is always a good practice.

The hanger has a white finish. While painting is possible, it is not recommended as it may affect the finish or compatibility with certain wall paints and primers. It is designed to blend in as is.

Ensure the hanger itself is perfectly level using the spirit level and is securely attached to the wall. Check that the artwork's frame is suitable for flush mounting.

The screws may not be fully tightened or are not appropriate for the wall material. Re-secure the hanger using wall anchors if necessary and ensure screws are firmly tightened.

The hanger was likely not installed perfectly level. Remove the artwork, check the hanger's level, and re-adjust if needed before re-hanging.

Remove the artwork immediately. This product has a maximum load capacity of 13kg. For heavier items, a different, more robust hanging system is required.