OX Spectrum Diamond Tile Drill - 125 mm
Best current price£101.99from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£101.99Visit shop OX Spectrum Premium M14 Dry Cut Diamond Tile Drill - 125 mm
Visit shopTravis Perkins£101.99Visit shop One Offer
1 offer from £101.99
View price history by clicking the chart icon.
Travis PerkinsOX Spectrum Premium M14 Dry Cut Diamond Tile Drill - 125 mm
£30.00 delivery
£101.99
Visit shop
Product Information
Full details
The OX Spectrum Diamond Tile Drill is a professional-grade cutting tool designed for tilers, contractors, and DIYers who require high-speed precision when working with hard materials. Its primary strength lies in its vacuum-brazed diamond construction, which allows for clean, efficient drilling through porcelain, granite, and marble without the need for water cooling. However, users should note that as a dry-cut tool, careful speed management is necessary to prevent overheating and premature wear on the diamond segment.
All features
| Model Part Number | MTD-125 |
|---|---|
| Brand | OX |
Extended Product Information
FAQs
Do I need to use water with this drill bit?
No, this is specifically designed for dry cutting, which allows for a cleaner working environment without cooling liquids.
Can I use this with a standard power drill?
The M14 fitting is designed for angle grinders. To use it with a standard drill chuck, you would need an M14 to hex-shank adapter.
What is the maximum tile grade this bit can handle?
The OX Spectrum is rated to handle materials up to Grade 5, including hard porcelain and natural stone.
How do I extend the life of the diamond tip?
Maintain steady, light pressure, avoid overheating by oscillating the bit while cutting, and dress the tip if it becomes glazed.
Is this suitable for drilling holes in glass?
No, this drill is specifically optimized for ceramic, porcelain, and stone tiles; it is not intended for glass applications.
Troubleshooting
Drill bit is slipping on the tile surface during startup
Start the cut at a 45-degree angle to create a groove before slowly bringing the bit up to a 90-degree angle.
Drill bit is cutting slowly or glazing over
Stop applying excessive force and pass the bit through a piece of sandstone or a dressing stone to expose fresh diamond segments.
Excessive chipping around the hole
Ensure you are using the correct RPM and that the bit is held perfectly perpendicular to the tile surface.
Pros and Cons
Pros
- No water cooling required
- High-speed performance on hard materials
- Compatible with standard M14 angle grinders
- Excellent durability for professional use
- Clean, precise holes in brittle surfaces
Cons
- Requires careful heat management by the operator
- Not suitable for use with standard drill chucks without an adapter
- Performance may degrade if used on materials softer than recommended
- Dry cutting can generate significant dust
Setup, Compatibility & Care
To set up the tool, screw the M14 thread directly onto your angle grinder spindle. Always ensure the grinder is unplugged or the battery is removed during installation. For best results, use a centering jig to ensure accuracy during the initial contact. Regarding care, avoid applying excessive downward pressure, as this can cause the diamond matrix to glaze over and lose its cutting effectiveness. If you notice a reduction in cutting speed, it is often a sign of glazing; you can typically restore the tip by making a few light passes through a soft abrasive block or a piece of sandstone. Always store the bit in a dry, protective case to prevent impact damage to the diamond edges.