Bosch Professional GBH 18V-18 X SDS-Plus Hammer Drill - 18V - 2 x 4.0Ah

The ONECHUCK system is designed to accept SDS-plus, standard 13mm cylindrical, and 10mm hex shank drill bits without needing to change the chuck.

KickBack Control is a safety feature that detects when the drill bit binds in material. It instantly shuts off the motor to help prevent injury from sudden rotational forces.

The brushless motor provides continuous power and maintains constant speed under load, leading to increased efficiency, longer tool life, and better performance.

Yes, this rotary hammer is compatible with all Bosch Professional 18V system batteries, provided they are within the specified Ah rating range.

Vibration Control actively dampens vibrations generated during operation, reducing hand-arm numbness and fatigue for more comfortable and prolonged use.

The kit typically includes the Bosch GBH 18V-18 X Rotary Hammer, 2 x 4.0Ah batteries, a GAL 18V-40 charger, and a carry case.

While designed for tradespeople and versatile use, its performance is optimized for tasks suitable for an 18V platform. For extremely heavy-duty, continuous concrete demolition, a higher voltage or corded tool might be more appropriate.

Ensure the battery is fully charged and correctly inserted. Check if the battery contacts are clean. Try a different, known-good battery.

The battery may be low on charge; replace with a fully charged battery. Check drill bit for damage or dullness, and ensure it is properly seated. Clear any debris from ventilation openings.

This indicates the drill bit is jamming. Reduce the drilling pressure, ensure the correct bit is used for the material, and verify the bit is not dull or damaged. Ensure the material is stable.

While Vibration Control is present, ensure you are not applying excessive force. Check the drill bit for damage or improper seating. Clean the tool as per care instructions.