Best current price£36.49from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£36.49Visit shop 20X Rj45 Cat6a Tool-Less Connectors & Boot - Utp Ethernet Plugs - No Crimp Tool 5056524234341
Visit shop
B&Q£36.99Visit shop - 20X Rj45 Cat6A Tool-Less Connectors & BootUtp Ethernet PlugsNo Crimp Tool
Visit shop3 offers from £36.49 - £36.99
View price history by clicking the chart icon.
This guide is for network technicians and DIY enthusiasts needing to terminate CAT6a or CAT6 network cables. The primary benefit is the tool-less, simplified termination process, saving time and effort compared to traditional connectors. A minor caveat is the need to ensure cable diameter compatibility, though included spacers help. These are standard 8P8C RJ45 connectors with molded boots, supplied in packs of 20, designed for high-speed networking up to 10Gbps. Key features include tool-less installation, color-coded conductor guides, and support for both solid and stranded core cables.
| Series | CAT6a |
|---|---|
| Brand | Loops |
No, these are designed as tool-less connectors. The primary installation involves arranging the conductors and closing the connector housing, which secures the cable and wires without a punch-down tool.
These connectors accept cables with an outer diameter of 6mm to 7.6mm. Spacers are included to help secure cables at the lower end of this range (down to 6mm).
Yes, these connectors can be used with both solid and stranded core CAT6 or CAT6a cabling. However, solid core is recommended for easier installation.
These are two different standards for arranging the wire pairs within the connector. TIA/EIA-568-B is more common for commercial installations. A 'straight-through' cable uses the same standard at both ends, while a 'crossover' cable uses one standard at one end and the other at the opposite end, typically for direct PC-to-PC connections.
No, these are Unshielded Twisted Pair (UTP) connectors. They are suitable for most standard networking environments. If shielding is required, you would need a shielded connector.
Each pack contains twenty (20) RJ45 CAT6a UTP connectors, complete with molded boots.
When terminated correctly with CAT6a or CAT6 cable, these connectors are designed to support network speeds of up to 10Gbps.
Ensure the correct size spacers are used for thinner cables. Verify that the outer insulation is stripped to the correct length and that the cable is fully seated before closing the connector.
Double-check the conductor arrangement against the color code. Ensure each conductor is fully inserted into its designated channel within the guide. Verify that the cable is properly seated within the connector housing.
Ensure the conductors are straight and not frayed. Trim conductors to a uniform length if necessary before insertion. Make sure the outer insulation is stripped cleanly.
Ensure the cable diameter is within the supported range. If the cable is too thin, use the provided spacers. Ensure the cable jacket is flush with the back of the connector before closing.
Setup Instructions:
Compatibility:
Care:
