Trident Electric Radiator Inhibitor - 250Ml - MPN:T101

The inhibitor is designed for long-term protection. It is typically added when the system is initially filled or refilled. It does not require regular re-application unless the system is drained.

The recommended dosage is 5ml of inhibitor per 1 liter of system water capacity. For example, a 30-liter system requires 150ml of inhibitor.

The Trident T101 is optimized for systems up to 50 liters. For larger systems, it is recommended to consult the manufacturer or use a product specifically designed for higher capacities.

Yes, it is suitable for aluminium and other common radiator materials. Always refer to your radiator manufacturer's guidelines if unsure.

Dual-action protection means the inhibitor tackles two main problems: it prevents corrosion (rusting) and also stops scale (mineral buildup) from forming inside your radiator system.

It provides some antifreeze properties for added winter safety, but it is not intended as a primary antifreeze in regions with extreme sub-zero temperatures. For such conditions, a dedicated antifreeze may be required.

It should be added directly to the radiator's open vent before filling the system with water. This ensures it mixes thoroughly with the system water.

Ensure the correct dosage of inhibitor has been added. Air may still be trapped; try bleeding the radiator. If noise persists, check for scale buildup which may require system flushing.

Verify that the inhibitor has been distributed evenly throughout the system. Check for blockages or airlocks, and consider a system flush if issues persist.

While the inhibitor protects against corrosion, existing damage may need professional attention. Ensure the inhibitor was added at the time of filling and is at the correct concentration.

Wipe up any spills immediately with a damp cloth to prevent damage to surfaces. Ensure the area is well-ventilated.