Best current price£75.00from eBay
Shopping.co.uk recommended and popular offers
eBay£75.00Visit shop Danfoss SET 1E 24 Hour Single Channel Electronic Timeswitch Control 087N654000
Visit shop3 offers from £75.00 - £300.00
View price history by clicking the chart icon.
The Danfoss SET1E Electronic Timeswitch is designed for homeowners and building managers seeking simple, reliable control over their heating or lighting schedules. Its key benefit is straightforward 24-hour programming, allowing for easy customization of 'On', 'Off', or 'Timed' modes. A potential caveat for some users might be its single-channel nature, meaning it controls one circuit. This timeswitch offers a user-friendly interface with an LED status indicator for clear operational feedback.
| Model Part Number | 087N654000 |
|---|---|
| Brand | Danfoss |
The Danfoss SET1E is an electronic timeswitch used to automatically control electrical devices, such as heating systems or lighting, by switching them on or off according to a programmed 24-hour schedule.
No, the SET1E is a 24-hour timeswitch, meaning it operates on a single daily cycle. It does not support separate programming for weekdays and weekends.
The LED indicator typically shows the current operating state of the timeswitch. For example, it might be lit when the connected load is switched on and off when it is switched off.
The timeswitch usually features a rotating dial or buttons to set the current time of day, which is crucial for the programmed schedule to function correctly.
'Off' mode disables the connected device. 'Timed' mode activates the device according to the programmed schedule. 'On' mode keeps the device permanently active, overriding the schedule.
No, the SET1E is a single-channel timeswitch and can only control one circuit or device at a time. For multiple zones, you would need multiple units or a multi-channel timeswitch.
The Danfoss SET1E Electronic Timeswitch weighs approximately 2.2 Pounds.
Verify that the unit is correctly wired and connected to a live power supply. Check the circuit breaker for the connected circuit. Ensure the power supply voltage matches the unit's requirements.
Double-check the programmed 'On' and 'Off' times for accuracy. Ensure the unit is set to 'Timed' mode and not 'On' or 'Off' permanently. Confirm the current time is correctly set on the 24-hour dial.
If the LED is off when it should be on, check the load connection and ensure the appliance is drawing power. If the LED is on but the appliance is not active, verify the unit is in 'Timed' or 'On' mode and the schedule is active.
A slight warmth is normal, especially under load. If the unit becomes excessively hot, immediately disconnect power and have it inspected by a qualified electrician, as this could indicate an overload or internal fault.
Setup: Installation of the Danfoss SET1E Electronic Timeswitch should be performed by a qualified electrician to ensure safety and compliance with electrical regulations. The unit connects to the electrical system to control a designated appliance or circuit. Ensure the power supply is disconnected before commencing any installation work.
Compatibility: This timeswitch is designed for controlling standard 240V AC circuits commonly used for heating systems and lighting. Always verify the load requirements of the connected device do not exceed the timeswitch's rating. It is compatible with single-channel applications.
Care: To maintain optimal performance, clean the exterior of the timeswitch periodically with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure ventilation around the unit is not obstructed. No user-serviceable parts are inside; do not attempt to open the unit.
