Best current price£42.85from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£42.85Visit shop Storm White Polyx Aluminium F Section - 25Mm X 4Mtr
Visit shop2 offers from £42.85
View price history by clicking the chart icon.
The PolyX Aluminium F Section is an essential edge trim for homeowners and contractors working with 25mm polycarbonate roofing sheets. It provides a professional, clean finish to the side edges of a structure while adding a critical layer of weather resistance and structural durability. While it excels at sealing and aesthetic refinement, users should note it is specifically engineered for 25mm thickness and is not compatible with thinner or thicker sheet variants.
| Model Part Number | AF254-W |
|---|---|
| Brand | Storm |
No, this F section is exclusively designed for 25mm polycarbonate sheets.
Fasteners are generally sold separately as the type required depends on your specific timber or metal rafter structure.
Yes, the white finish is designed for external use and provides excellent UV resistance.
While the finish is durable, if you choose to repaint, ensure you use a primer suitable for aluminium surfaces.
You can cut the aluminium profile using a standard hacksaw with a fine-tooth blade.
Ensure the edge of the polycarbonate sheet is not crushed or distorted; trim any rough plastic edges with a sharp utility knife.
Check that the sheet is fully pushed into the profile and consider using a bead of neutral cure silicone sealant to help bridge any minor gaps.
Setup: To install, ensure the polycarbonate sheet is fully seated within the support bar or frame. Slide the F Section firmly onto the exposed edge. If the fit is tight, a rubber mallet may be used to gently tap the section into place. It is recommended to use appropriate fasteners through the pre-drilled holes or designated mounting points to secure the trim to the rafter.
Compatibility: This product is strictly limited to 25mm thick polycarbonate sheets. Attempting to use it on thinner materials may result in a loose fit, while thicker materials will not accommodate the profile.
Care: The white powder-coated finish requires minimal maintenance. Clean periodically using a mild detergent and a soft cloth to remove dust and dirt buildup. Avoid abrasive scouring pads that could scratch the finish.
