Mitre MTR DOUBLE ACTION PUMP

Typically, the Mitre MTR Double Action Pump is sold as the pump unit itself. An inflation needle is often required but may need to be purchased separately, depending on the retail packaging.

With its double-action design, it significantly speeds up the process. Inflating a standard football to the correct pressure usually takes under a minute of consistent pumping.

Yes, the pump is versatile and can be used with any standard inflation needle for balls such as rugby balls, netballs, basketballs, and volleyballs.

While it can inflate basketballs, it is primarily designed for the pressure levels typical of footballs and rugby balls. For sustained high-pressure inflation, an electric pump might be more efficient, but this manual pump is adequate for occasional top-ups.

Wipe the exterior with a damp cloth. Avoid submerging the pump in water. Ensure the nozzle area is free from dirt and debris.

A double-action pump inflates your ball on both the upward and downward strokes of the handle, rather than just one, making the inflation process much faster.

Check that the inflation needle is securely inserted into the pump and the ball's valve. Ensure the needle is not bent or blocked. Verify the pump is functioning by testing it with air only (no ball attached).

Ensure the inflation needle is tightly screwed or pressed into the pump's nozzle. Check the needle itself for any cracks or damage. Make sure the ball's valve is in good condition.

The internal mechanism may require lubrication. Ensure the pump is clean. A very small amount of silicone-based lubricant applied to the piston seal (if accessible) can help, but avoid over-lubrication.

Inspect the pump body, hose (if applicable), and nozzle for any signs of damage or cracks. Ensure all connections are tight.