Universal T-Shank Jigsaw Blade - Sjg67620

This blade is designed for cutting hardwood, softwoods, plastics, OSB, plywood, and laminated particle board.

The cutting depth ranges from 3mm to 30mm.

No, this blade is intended for wood and plastics. It is not designed for cutting metal.

Use the appropriate speed setting for your material and maintain a steady, controlled feed rate. For delicate materials, consider supporting the workpiece and using painter's tape along the cut line.

T-Shank refers to the shape of the end of the blade that inserts into the jigsaw's chuck. This is a universal design that fits most modern jigsaws.

Keep the blade clean after use, store it in a dry environment, and use the correct speed and feed rate for the material to avoid overheating or excessive wear.

Ensure the blade is securely seated in the jigsaw clamp. Verify you are not forcing the cut and are letting the blade do the work. Check if the blade is bent or damaged; if so, replace it. Adjust the jigsaw's orbital action if available.

Reduce the jigsaw's speed setting, especially when cutting plastics or laminated surfaces. Try using a slower, more controlled feed rate. For cleaner cuts on delicate materials, consider using painter's tape along the cut line or a 'fine finish' jigsaw blade.

Ensure the kerf (cut width) is sufficient for the blade. Do not twist the blade while cutting. Back out of the cut and restart if necessary, ensuring the blade is aligned with your cut line. Check for obstructions in the material.