Best current price£6.37from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£6.37Visit shop Cablenet Red 0.3M Cat6a Rj45 S/Ftp Lsoh 26Awg Snagless Booted Patch Le
Visit shop
B&Q£6.73Visit shop B&Q - Cat6A Sstp Lszh Rj45 Network Ethernet Patch 10 Gigabit Cable 1M Red
Visit shop17 offers from £6.37 - £16.48
View price history by clicking the chart icon.
The Cablenet Cat6a Network Ethernet Patch Cable is designed for users needing high-speed, reliable network connections, especially for 10 Gigabit Ethernet applications. Its primary benefit is enhanced performance and reduced interference, ensuring stable data transfer. A potential consideration is its specific standard compliance, which requires compatible network equipment for full utilization. This guide covers its advanced features, real-world applications, and essential care instructions.
| Series | Cat6a |
|---|---|
| Model Part Number | 65-2010 |
| Brand | Cablenet |
Cat6a offers significantly higher performance, supporting 10 Gigabit Ethernet (10Gbps) up to 100 meters, compared to Cat5e which is typically limited to 1Gbps. Cat6a also provides better performance at higher frequencies (600MHz vs 100MHz) and superior shielding.
No, this specific model is not designed for outdoor use. It features an LSZH jacket which is primarily for fire safety indoors. Outdoor-rated cables have different jacket materials to withstand UV, moisture, and temperature extremes.
Yes, the cable is backward compatible. However, your network speed will be limited by the slowest component in the chain, which in this case would be your Cat5e router, meaning you will likely only achieve 1Gbps speeds.
S/FTP stands for Screened/Foiled Twisted Pair. It means each individual pair of wires inside the cable is wrapped in foil shielding, and then the entire bundle of pairs is covered by an overall braided shield. This provides excellent protection against electromagnetic interference (EMI) and crosstalk.
When you plug the RJ45 connector into a port, you should hear and feel a distinct 'click'. This indicates that the locking clip has engaged, securing the cable in place.
LSZH stands for Low Smoke Zero Halogen. Cables with this jacket material are designed to emit very little smoke and no halogenated gases when exposed to fire, making them a safer choice for enclosed spaces and environments where air quality is a concern.
Yes, this cable supports Power over Ethernet (PoE), including PoE++ (4PPoE), meaning it can reliably deliver power and data to compatible devices over the network connection.
Verify both ends of the cable are securely plugged into their respective ports. Check that the cable is not visibly damaged. Test with a known working cable or port to isolate the issue.
Ensure all devices and network equipment in the chain support Cat6a or higher for optimal speeds. Check for physical damage to the cable or connectors. Verify the cable is not exceeding its maximum supported length for the desired speed.
Inspect the RJ45 connectors for any bent pins or debris. Ensure the snagless boot is not preventing the connector from seating properly. Test the cable in a different location or with different equipment to rule out environmental interference or faulty devices.
This is normal for S/FTP shielded cables. Gently guide the cable, avoiding sharp bends. Ensure adequate space for routing in high-density installations.
Setup: This is a standard Ethernet patch cable with RJ45 connectors on both ends. Simply plug one end into your network device (e.g., router, switch, computer) and the other into its corresponding network port. Ensure a "click" sound confirms the connector is securely latched.
Compatibility: This Cat6a cable is backward compatible with Cat6, Cat5e, and Cat5 standards and ports. However, to achieve the full 10Gbps speed, both connected devices and network infrastructure (switches, routers) must also support Cat6a or higher standards.
Care:
