Best current price£162.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£162.00Visit shop Flat Glazing Styrene Clear Polystyrene Glazing Sheet 2400 X 1200 X 4Mm
Visit shop3 offers from £162.00
View price history by clicking the chart icon.
This 4mm clear polystyrene glazing sheet from Flat Glazing is designed for DIY enthusiasts and designers undertaking internal glazing and creative projects. Its key benefit is offering a safer, lighter, and more economical alternative to traditional glass, though it may scratch more easily than glass. This guide covers its features, applications, setup, and care to help you maximize its utility.
| Model Part Number | 4mm Styrene |
|---|---|
| Brand | Flat Glazing |
No, this 4mm styrene sheet is intended for internal glazing and design projects only. It is not designed to withstand UV exposure or harsh weather conditions.
Use a soft, damp cloth with mild soap and water. Avoid abrasive cleaners or solvents, which can damage the surface.
While it is safer than glass, it is not typically recommended for direct, constant contact with water or for use in high-moisture environments like shower enclosures due to potential for scratching and long-term water spotting. For splashbacks in areas with occasional moisture, it can be suitable if properly sealed.
For best results, use a fine-toothed saw or score the sheet multiple times with a sharp craft knife and straight edge, then snap it cleanly.
Styrene is generally less impact-resistant and more brittle than acrylic, but it is still much safer and lighter than glass. It's best suited for applications where it won't be subjected to significant impact.
Yes, you can drill holes. Use a drill bit designed for plastics at a slow speed and steady pressure to prevent cracking. Start with a small pilot hole.
Use adhesives specifically formulated for polystyrene or plastics. Always test the adhesive on a small, inconspicuous area or scrap piece first to ensure compatibility and avoid damage.
Inspect the protective film. Scratches are often on the film itself. If the styrene is damaged, contact the supplier with photographic evidence.
Use a sharp blade, score the sheet multiple times along a straight edge, and snap firmly. Ensure the sheet is well-supported.
The adhesive may be solvent-based. Remove excess adhesive carefully and try a different, plastic-compatible adhesive. Test on a scrap piece first.
Ensure the sheet is not exposed to direct, excessive heat sources. Allow it to acclimatize to room temperature if recently transported in extreme conditions.
Setup: This styrene sheet can be easily cut to size using a fine-toothed saw or a scoring knife and straight edge. For a clean cut, score the sheet multiple times along your cutting line and then snap it over a table edge. Ensure any protective film is removed *after* cutting to avoid scratches during the process. Installation can be achieved using standard fixings suitable for plastics or appropriate adhesives depending on the application. Always test fixings or adhesives on a scrap piece first.
Compatibility: The sheet is compatible with most common adhesives designed for plastics, but avoid solvent-based glues that can craze or damage the material. It's suitable for use with standard framing hardware.
Care: Clean the surface using a soft, damp cloth with mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can scratch or cloud the surface. For stubborn marks, a plastic cleaner specifically designed for polystyrene can be used. Always wipe gently to prevent scratching.
