Best current price£2.66from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£2.66Visit shop Draper Zinc Plated Threaded Insert Rivet Nuts M5 X 0.8Mm (Pack Of 50) Pack 50 04052
Visit shop
B&Q£7.48Visit shop B&Q - Zinc Plated Threaded Insert Rivet NutsM4 X 0.7mm (Pack Of 50) 04051
Visit shop44 offers from £2.66 - £14.99
View price history by clicking the chart icon.
The Draper Threaded Insert Rivet Nuts (M8 x 1.25mm) are an ideal solution for DIYers and professionals requiring reliable, permanent thread fixtures in thin-gauge sheet metal or plastic. These zinc-plated inserts provide a high-strength anchor for bolts in materials where traditional tapping is not feasible, though they do require a compatible rivet nut tool for proper installation.
| Colour | Silver |
|---|---|
| Model Part Number | 04054 |
| Brand | Draper |
These M8 inserts are designed for materials with a thickness between 0.5mm and 3.5mm.
Yes, a rivet nut setting tool (or nutsetter) is required to properly swage the insert into the workpiece.
These are designed for metal and plastic sheet applications; they generally do not provide sufficient grip in soft wood.
Yes, they feature a zinc-plated finish which provides a good level of resistance to corrosion in standard environments.
Always refer to the rivet nut tool instructions, but generally, an M8 rivet nut requires a drill hole slightly larger than the diameter of the insert body.
The pilot hole was likely drilled too large. Ensure the hole diameter matches the rivet nut specifications perfectly.
Check that the tool stroke adjustment is correct for an M8 insert; if the tool is set for a smaller size, it may not apply enough pressure.
Ensure the installation tool mandrel is fully threaded into the insert before beginning the compression cycle to prevent cross-threading.
To install these inserts, you must first drill a hole of the appropriate diameter (check your tool's manual for M8 hole sizing requirements) into the workpiece. Thread the rivet nut onto the mandrel of your installation tool. Insert it through the pre-drilled hole, operate the tool to compress the nut until it is securely locked against the rear surface, and then unscrew the tool mandrel. Ensure the surface is free of burrs after drilling to ensure the flange sits flush. Store these in a dry environment to maintain the integrity of the zinc coating.
