Simpson Strong Tie Heavy Flat Strap - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This heavy-duty flat strap is designed for construction professionals and DIY enthusiasts needing to reinforce structural joints. Its key benefit is providing significant lateral resistance, ensuring stronger and more stable connections. A caveat to consider is its specific application, best suited for timber-to-timber or timber-to-masonry connections where lateral support is paramount.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 5063238181199 |
| Brand | Simpson Strong-Tie |
Extended Product Information
FAQs
What type of fasteners should I use with this flat strap?
Use structural screws or nails that are rated for the load requirements of your project and are suitable for the materials you are fastening (e.g., timber, masonry). Consult with a building professional or hardware store for specific recommendations.
Can this strap be used for seismic or high-wind applications?
This strap provides general lateral resistance. For specific seismic or high-wind zone requirements, consult local building codes and engineering specifications to ensure this product meets the necessary structural performance standards.
Is the strap pre-drilled?
This particular model is not pre-drilled. You will need to drill holes or use appropriate fasteners that penetrate the strap and the substrate.
What is the difference between this and a joist hanger?
A flat strap is primarily for reinforcing connections and providing lateral stability. Joist hangers are specifically designed to support the end of a joist or beam.
Can I cut the strap to a shorter length?
While it is possible to cut the strap, doing so may expose the raw steel and reduce its corrosion resistance. If cutting is necessary, ensure the cut end is properly treated with a galvanised coating repair product.
What is the weight of the strap?
The exact weight can vary slightly, but it is designed to be heavy-duty. Specific weight information is usually available on the product packaging or manufacturer's technical datasheet.
Troubleshooting
Strap is difficult to bend into desired shape.
For minor adjustments, try using a vise or clamping system. For sharper bends or if significant force is required, consider if the strap is the most appropriate solution for the specific angle, or if a different connector might be better suited.
Fasteners are not holding securely.
Ensure you are using the correct type and size of structural fasteners. Verify that the substrate (wood or masonry) is sound and not degrading. Check for adequate fastener depth and consider using pilot holes to prevent splitting wood.
Visible rust on the strap.
Minor surface rust on galvanised steel can sometimes occur. Clean the area and apply a suitable metal primer and paint for protection. If rust is extensive or deep, the strap may need to be replaced.
Pros and Cons
Pros
- Provides excellent lateral support for structural joints.
- Durable galvanised steel construction ensures longevity.
- Generous dimensions suitable for a variety of applications.
- Resistant to corrosion, making it suitable for outdoor or exposed environments.
- Simple to install with appropriate fasteners.
Cons
- Requires specific fasteners (e.g., screws, nails) which are not included.
- Primarily for timber-to-timber or timber-to-masonry applications; not universal.
- Appearance may not be suitable for all aesthetic requirements without further finishing.
- Can be cumbersome to handle due to its length and rigidity.
Setup, Compatibility & Care
Setup: To install the flat strap, align it with the structural members requiring reinforcement. Use appropriate fasteners such as screws or nails that are rated for structural loads and compatible with the material being joined (e.g., timber, masonry). Ensure fasteners are driven straight and fully engaged for maximum holding power. Pre-drilling may be necessary depending on the fastener type and substrate. The strap can be bent to conform to certain angles, but excessive bending may compromise its strength.
Compatibility: This strap is primarily designed for use with timber construction and compatible with various wood types. It can also be used with masonry if appropriate masonry anchors and fasteners are employed. Ensure the length and width of the strap are suitable for the joint being reinforced.
Care: As the strap is made from galvanised steel, it offers good corrosion resistance. For maximum longevity, especially in harsh environments, inspect periodically for any signs of damage or corrosion. Clean with a damp cloth if necessary. Avoid using abrasive cleaners that could damage the galvanised coating.