Belt Dressing Spray 400mL - Aerosol Solutions

Application frequency depends on usage. For critical applications, check for slippage regularly. Typically, reapplication may be needed every few months or when noise or performance issues return.

This product is intended for V-belts and flat belts to prevent slippage. It is generally not recommended for timing belts, which require specific lubrication or can be damaged by such treatments. Always consult your vehicle or equipment manual.

Overspray on rubber hoses or plastic components should be wiped off immediately with a clean cloth. If it contacts painted surfaces, clean with a mild detergent and water. Avoid prolonged contact with sensitive materials.

By preventing slippage and reducing friction, it can help reduce premature wear caused by heat and abrasion from slipping. However, it does not repair a physically worn-out belt.

Yes, it is suitable for serpentine belts and other V-belts commonly found in automotive applications to address slippage and noise.

The can size is 400mL.

Ensure the belt is clean and dry before application. Apply a second, light coat if necessary. If slipping persists, the belt may be excessively worn or damaged and requires replacement.

Shake the can vigorously for at least 30 seconds. Ensure the nozzle is clear and not blocked. If the issue persists, the can may be faulty.

You may have over-applied the product. Clean the belt and pulley thoroughly and reapply a very light coat. Ensure the belt is correctly tensioned.