Best current price£134.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£134.00Visit shop Jb Kind Doors Jb Kind Trenched Hardwood White Primed Fd30 Fire Internal Door Lining Set 2070 X 108Mm
Visit shop6 offers from £134.00 - £145.00
View price history by clicking the chart icon.
This JB Kind door lining set is for professional builders and DIY enthusiasts needing to install 762mm or 838mm wide FD30 fire doors. Its key benefit is simplifying fire door compliance with pre-grooved intumescent seal slots and a reversible head for easier fitting. A potential caveat is its specific sizing, requiring precise measurement for narrower doors.
| Brand | JB Kind Doors |
|---|
This lining set is designed for internal doors with widths of 762mm and 838mm, and a standard height of 1981mm. It can be cut to fit narrower widths.
No, intumescent seals are not included in this lining set. You will need to purchase 15mm x 4mm intumescent seals separately.
No, this lining set is specifically designed for internal doors and is not suitable for external applications.
This lining set is part of an FD30 fire door system. The lining set itself is designed to accommodate the necessary components for 30 minutes of fire resistance when correctly installed with appropriate seals and a fire-rated door.
The white primed surface is ready for a top coat. Apply your preferred paint finish after touching up any installation marks. Ensure the primer is fully dry before painting.
The kit includes: one head (940mm x 108mm/133mm x 32mm), two jambs (2010mm x 108mm/133mm x 32mm), two jamb stops (2010mm x 32mm x 13mm), and one head stop (940mm x 32mm x 13mm).
This kit is specifically designed for internal FD30 fire doors of 762mm or 838mm width. Always ensure compatibility with your specific fire door slab and certification.
Verify the door opening dimensions against the product specifications. The set is designed for 762mm or 838mm wide doors. If the opening is significantly different, modifications or a different product may be required. For narrower doors, ensure precise cuts are made.
Confirm that the correct size intumescent seals (15mm x 4mm) are being used. Ensure the grooves are free from debris. If the seals are difficult to insert, a small amount of dry lubricant (e.g., graphite powder) can be applied sparingly.
Carefully touch up any chipped or scratched areas with a suitable white primer and allow it to dry completely before applying the final top coat.
Utilize the reversible and trenched feature of the head. Ensure it is oriented correctly for the door width being installed. Double-check that the jambs are plumb before securing the head.
Setup:
Compatibility:
Care:
