Best current price£11.18from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£11.18Visit shop Serious Glue, High Strength, Waterproof, Ideal For Fixing And Repairs, Transparent Non-Drip Gel, Extreme Temperature Resistance, Solvent Free, 33G 634041115463
Visit shop2 offers from £11.18 - £11.99
View price history by clicking the chart icon.
Evo-Stik Serious Glue is a high-performance, single-component MS polymer adhesive designed for DIYers and professionals who need an industrial-strength bond for almost any material. Its primary benefit is its incredible versatility and the ability to bond even on damp surfaces or underwater, making it ideal for indoor and outdoor repairs. One caveat is that, while it provides a permanent lifetime bond, it may not be suitable for applications requiring rapid setting times compared to standard super glues.
| Model Part Number | 30602444 |
|---|---|
| Brand | Evo-Stik |
It is suitable for many materials, but testing on a small, inconspicuous area is recommended for specific plastics as some low-energy plastics may not bond well.
While it sets relatively quickly, it achieves full strength over 24-48 hours depending on the temperature and humidity.
Yes, its ability to cure underwater and its solvent-free formulation make it effective for many aquatic repair applications.
Yes, once fully cured, most types of paint can be applied over the adhesive line.
It is designed to withstand normal environmental temperature fluctuations but is not recommended for high-heat applications like stovetops or engines.
The nozzle may have a dried plug from previous use. Use a pin to clear the tip or trim a small amount off the nozzle tip.
Ensure surfaces were held in place with clamps or tape during the initial cure phase; verify the glue has had sufficient exposure to moisture.
Wipe away uncured excess immediately with a dry cloth. Once cured, the glue must be removed mechanically with a sharp blade or scraper.
Before applying the adhesive, ensure that the bonding surfaces are free from loose dust, dirt, or oil. While it works on damp surfaces, removing standing water improves the initial tack. Apply the glue to one surface in beads or spots, press the materials together firmly, and hold or clamp them in place to ensure contact while the moisture-curing process initiates.
Keep the nozzle clean after use to prevent clogging. Store the product in a cool, dry place away from direct sunlight. Because it cures through moisture, ensure the cap is tightly sealed after every application to prevent the contents of the tube from hardening prematurely.
