Black & Decker Drill Driver - 18V

The drill uses an 18V Lithium-Ion battery.

You can drill into wood and metal up to 25/10mm.

Loosen the chuck by turning it, insert the drill bit, and tighten the chuck securely.

Rotate the torque selector ring located on the drill to choose the appropriate setting.

Warranty information is available from the manufacturer. Please refer to the product documentation or contact customer support.

The drill is designed for DIY projects and is not intended for heavy-duty, professional use.

Clean the drill with a soft, dry cloth and store it in a dry place.

Check if the battery is charged and properly inserted. Ensure the power switch is in the 'on' position.

Make sure the battery is fully charged. Check the torque settings and adjust accordingly. If using the drill for a long time, let it cool down before continuing.

Tighten the chuck securely. Check the bit for wear and tear. If the problem persists, try a new drill bit.

Ensure the battery is properly inserted. Check if the worklight is activated by the trigger.